Technical information:
How to:
View colour/order:
Resene has the most extensive range of Environmental Choice approved paints, stains and coatings suitable for a myriad of residential, commercial and industrial applications – view Resene's Environmental Choice certificate. Resene prints brochures, flyers etc on sustainable paper stocks wherever possible. When you download some pdf files from this page they will refer to being printed on sustainable paper stock. This is because they are an electronic copy of what we distribute to our customers.
A brief summary of the main product lines that are contained in this section are included below - either scroll down through the information or choose from this list of product types. Note that you can click on the icon of the paint tin/container to zoom and/or to download that image/s. For information on how to paint your home click here or watch our handy how to videos. For colour options view Resene Colour Charts or the Online Colour Library.
Search the entire Resene product range...
Environmental Choice approved
|
Resene Broadwall 3 in 1 Ranchsliders, massive windows, super smooth finishes and monolithic walls are a headache for many causing critical light conditions and less than perfect finishes on walls as the glancing light shines a spotlight on any surface imperfections. Often the problem is only evident for a short period each day when the light is at a certain angle. The situation is made worse when the level of finish is insufficient, such as a Level 4 finish when a Level 5 finish is needed. To achieve a Level 5 finish the entire surface of the paperfaced plasterboard and stopping should be skimcoated. This can be achieved by brush or roller with Resene Broadwall Surface Prep or by specialist spray application with Resene Broadwall 3 in 1. Resene Broadwall 3 in 1 is designed for use over stopped and jointed wall systems in place of traditional surfacers and sealers. It equalises surface porosities; smoothes minor surface irregularities; minimises textural differences. A key element to achieving a Level 5 finish on paperfaced plasterboard. Suitable for use as a surfacer, sealer, and finish coat on ceilings in dry areas tinted to a range of popular Resene off-white and neutral colours. Voted best new product by the Master Painters NZ in 2007. Typical uses: Air-dry (polymer based) stoppings and finishing compounds, gypsum based stoppings and finishing compounds, paperfaced plasterboard (GIB®, Gyprock®), timber and reconstituted timber products. |
|
Resene Broadwall Surface Prep & Seal Resene Broadwall Surface Prep & Seal is a high-build basecoat designed for roller application over stopped and jointed wall systems. It equalises surface porosities, smoothes minor surface irregularities, minimises textural differences, seals the surface and provides a superb base for subsequent Resene finishes. A key element to achieving a level 5 finish on paperfaced plasterboard. Typical uses: Air-dry (polymer based) stoppings and finishing compounds, gypsum based stoppings and finishing compounds, MDF, paperfaced plasterboard (GIB®, Gyprock®), pine. |
|
Resene Brushable Crack Filler When hairline cracks strike they destroy the striking good looks of the paint finish. Simple application of multiple coats of elastomeric Resene Brushable Crack Filler across the crack will resolve the imperfection and banish it from view with a minimum of fuss. Elastomeric Resene Brushable Crack Filler is a convenient way to deal with small cracks in concrete buildings, which may still be cyclically moving up to 25%. It is designed to handle cracks up to a maximum of 2mm wide before overcoating with the recommended paint system. Simple application of multiple coats of Resene Brushable Crack Filler across the crack will resolve the imperfection and banish it from view with a minimum of fuss. Typical uses: Cementitious surfaces. |
|
Resene Limelock Resene Limelock is a preparatory coating used for the curing and sealing of cementitious substrates. It promotes curing by producing a water barrier, which unlike traditional curing membranes, may be overcoated with waterborne finishes at any stage. Its ability to cure and seal the substrate eliminates the need to leave the plaster to cure for seven days before painting. It may be applied by the plasterer to promote cure or by the painter who wants to ensure the surface is sealed. When dark, heat absorbing topcoats are planned, it is still prudent to wait seven days before painting. Resene Limelock traps free lime in the cementitious substrate protecting the paint finish against the appearance of unsightly lime staining, and providing a perfect base for subsequent Resene finishes. Resene Limelock is designed to be overcoated. It is considered part of the surface preparation process and should be applied as soon as possible over plaster systems to achieve maximum potential. Typical uses: Cementitious surfaces, including concrete, render, stucco and thin layer polymer modified plaster. |
|
Resene StainLock Resene StainLock waterborne stain sealer is formulated to hold back a wide range of common surface stains to prevent them damaging subsequent topcoats. Designed for overcoating with your choice of Resene waterborne decorative topcoat. Ideal over stained areas where stain transmission is more likely. Typical uses: Brickwork, cementitious surfaces including concrete, concrete tiles, fibre cement, old stained surfaces, plaster, plasterboard and plasterboard compounds, timber. |
|
Resene Timber Surface Prep Resene Timber Surface Prep is a low VOC pigmented high build waterborne surfacer for solid timber. Used to upgrade and fill surface defects in solid timber substrates prior to application of waterborne finishing systems. Typical uses: Finger jointed pine, open grained timber, timber weatherboards, windowsills. |
Environmental Choice approved
|
Resene Acrylic Undercoat Resene Acrylic Undercoat is an easy brushing, quick, hard drying undercoat with exceptional flow and sanding characteristics. While specifically designed for maximum benefit under waterborne enamels, such as Resene Enamacryl and Resene Lustacryl, Resene Acrylic Undercoat tinted to the correct colour is ideal for use under a wide range of waterborne and solventborne topcoats to improve the hiding of the paint system. Resene Acrylic Undercoat gives all the hiding benefits associated with Resene Enamel Undercoat combined with the advantages of being waterborne, such as easy clean up in water, lower odour and therefore the desirability of using it with both acrylic and enamel topcoats. Suitable for interior and exterior use, it can be used in most paint systems as a substitute for Resene Enamel Undercoat. Typical uses: All exterior and interior prepared surfaces, block and brickwork, cement plasters, cloth and woven wallcoverings, fibre and particle board, furniture, paperfaced plasterboard (GIB®, Gyprock®), repaint old work, timber (including Matai, Spotted Gum and Totara), wallboards, wallpaper. |
|
Resene AquaLAQ Quick Dry Sealer Resene AquaLAQ Quick Dry Sealer is a unique waterborne sealer designed to seal off grain raising in MDF to provide a sound, flat, and high quality substrate ready to be topcoated. With minimal sanding required, you can enjoy lower labour costs. Enjoy low odour and low VOC with this product. The clear sealer may also be used on timber and timber/paper veneers, which would normally be susceptible to moisture, to highlight their warmth and grain while providing a sealed substrate suitable for topcoating. Typical uses: Primer/sealer for MDF board, various types of mass produced boards, most wood substrates. Usually used by professional spray applicators. Recommended as part of the Resene AquaLAQ system – find out more about Resene AquaLAQ. |
|
Resene Broadwall Waterborne Wallboard Sealer Resene Broadwall Waterborne Wallboard Sealer is a water reducible first coat for plasterboard walls and air-dry stoppings. Designed to minimise porosity and textural differences. VOC free. Typical uses: Air-dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard (GIB®, Gyprock®). |
|
Resene Concrete Primer Resene Concrete Primer is designed for cementitious surfaces, including all concrete, plaster and surfaces, such as fibre cement to make ready for topcoating. Provides long-term adhesion coupled with exceptional durability even when left uncoated for prolonged periods. Typical uses: Brick and blockwork, cementitious surfaces, fibre cement, formed concrete, plaster, precast panels, tilt slab. |
|
Resene Membrane Primer (previously known as Membrane Roofing Primer) Resene Membrane Primer is a specially formulated pre-treatment to upgrade adhesion, both wet and dry, to rubber membrane sheeting materials. Typical uses: Asphalt tennis courts, bituminous substrates, EPDM and butyl rubber membrane sheeting. |
|
Resene Quick Dry Resene Quick Dry Waterborne Primer Undercoat provides long-term flexibility over unstable substrates coupled with exceptional durability even when left uncoated for prolonged periods. The latest formulation has enhanced flow and sanding characteristics for maximum benefit under waterborne enamels, such as Resene Enamacryl and Resene Lustacryl. Typical uses: Architraves, block and brickwork, cement plaster, cloth and woven wallcoverings, particle board, repaint old work, timber (including Matai, Spotted Gum and Totara), wallboards, wallpaper. |
|
Resene Aquapel & Terracotta Sealer – waterborne Resene Aquapel & Terracotta Sealer is a clear water repellent treatment formulated to help control efflorescence and give a long-term waterbeading effect to deter water penetration. Use on its own or as a primer under waterborne coatings. This product has changed names from Resene Terracotta Sealer. Typical uses: Most porous building materials, terracotta and as a protective finish over Resene FX Faux Rust Effect. |
|
Resene Wintergrade Quick Dry Resene Wintergrade Quick Dry waterborne primer undercoat is designed to cure at low temperatures down to 3°C. It provides long term flexibility over unstable substrates coupled with exceptional durability even when left uncoated for prolonged periods. Typical uses: Architraves, block and brickwork, cement plaster, HDF and MDF, cloth and woven wallcoverings, fibre and particle board, repaint old work, timber (including Matai, Spotted Gum, Totara), wallboards, wallpaper. |
Environmental Choice approved
A
|
Resene AquaLAQ Colour Coat Resene AquaLAQ Colour Coat is a single pack waterborne satin acrylic with an extremely durable finish and excellent UV resistance. New generation rheology provides easier application. Fast drying, it is designed to be touch dry in minutes, with a smooth silky feel. Enjoy low odour and low VOC with this product. Topcoat with Resene AquaLAQ Clear Coat or Resene two pack urethanes if required. Resene AquaLAQ Colour Coat is available in a huge range of colours from the Resene Total Colour System enabling you to achieve your desired Resene colour finish. Special colours can be custom made or matched on request for you. Typical uses: Kitchens, bathrooms, shop fittings, doors, furniture, blinds. Usually used by professional spray applicators. Recommended as part of the Resene AquaLAQ system – find out more about Resene AquaLAQ. |
B
|
Resene Blacktop Resene Blacktop is a cold applied, heavy-bodied, slip-resistant topping for rejuvenating aged or worn asphalt. Based on a bitumen emulsion with graded fillers that dries to produce a durable, weather and wear resistant finish. Typical uses: Asphalt driveways, asphalt paths, asphalt playgrounds, asphalt recreational areas, asphalt tennis courts. |
C
|
Resene Ceiling Paint Resene Ceiling Paint is recommended for use on ceilings of living rooms, bedrooms and dining rooms where a flat finish is required. A very low odour, low spatter, low VOC product. Typical uses: Fibrous plaster, paperfaced plasterboard (GIB®, Gyprock®), plaster glass, repaints. Not recommended for wet areas (bathrooms, kitchens and laundries - use Resene SpaceCote Low Sheen or Resene SpaceCote Low Sheen Kitchen & Bathroom). |
|
Resene ClinicalCote Resene ClinicalCote is a low odour, washable waterborne paint finish formulated with anti-microbial silver for use on broadwall areas in buildings such as hospitals, rest homes, medical centres and clinics. In keeping with the modern trend of low sheen finishes, Resene ClinicalCote is available in both low sheen and satin finishes. It is designed to withstand alcohol and glycol containing hospital cleaners to keep it looking its best. The low sheen has a desirable low sheen finish from all angles. The painted surface can be cleaned just seven days after application. Typical uses: Interior walls and ceilings. |
|
Resene Contractor Resene Contractor is a new approach using advanced design polymers to achieve increased film build with standard application techniques. Skilled tradesperson-like application of the unthinned product will usually achieve complete hiding in one application. Based on wet-adhesion modified polymers for use over a wide variety of surfaces. Typical uses: Block and brickwork, cement plaster, concrete, fibre and particle board, fibre cement, primed galvanised steel, primed timber, repaints, sealed paperfaced plasterboard (GIB®, Gyprock®), sealed plaster glass, stucco, timber, wallpaper. |
|
Resene CyberCote Resene CyberCote is designed to produce a tough interior flat finish on broadwall and ceiling areas (excludes wet areas). Typical uses: Ceilings and walls. This product was previously known as Cybercoat. |
E
|
Resene Earthsense Ceiling Paint Resene Earthsense Ceiling Paint is a waterborne alkyd flat ceiling paint formulated with a special renewable extender pigment, providing at least 20% by volume of Renewable Raw Materials (RRM) of the final paint film. RRM calculated after application and evaporation of water. Typical uses: Ceilings. |
|
Resene Enamacryl Resene Enamacryl is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing and fast drying with easy water clean up. Typical uses: Window and door trim, panels and joinery. |
|
Resene Enamacryl CoolColour™ Resene Enamacryl CoolColour is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing and fast drying with easy water clean up. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up, which makes it ideally suited for dark roofing colours. Typical uses: Window and door trim, panels and joinery. |
F
|
Resene FilmPro Lord of the Rings, King Kong and The Last Samurai didn't just have multi-million dollar budgets in common, they also shared a common use of Resene paints and colours to decorate a myriad of sets and props. A supplier to the industry for some years, Resene has learnt to tip technology on its head creating specialised coatings that will create thick ridges in paint, aged effects, and encourage the growth of mould, problems that normally cause paint chemists recurring nightmares. Having tackled the weird and wonderful, Resene paint chemists focused their attention on a range of set colours commonly used by professional set designers and painters. Resene FilmPro is a tough waterborne finish designed to colour and enhance sets. Available in a standard range of colours, digital blue and green and reduction and clear bases. The new range may be intermixed or reduced to ensure the set professional can deliver exactly the colour the director demands for the perfect backdrop to their scene. Typical uses: A versatile product designed to go over the wide variety of materials used in set design. |
|
Resene Fresh Air Carparking Resene Fresh Air Carparking is a semi-transparent waterborne satin topcoat with photocatalytic pigments. Designed to break down NOx and organic atmospheric pollutants that come into contact with the film. Apply as a thin topcoat over a white substrate. This product has been designed for use in interior carparks. Activity is increased with increasing light flux. Typical uses: Brick, concrete, carparking areas, fibre cement. |
|
Resene FX Blackboard Paint Painting a kid's room or maybe a sidewalk cafè? Add a blackboard to your plans with Resene FX Blackboard Paint and you'll have a very handy extra feature for a very minimal cost. Resene FX Blackboard Paint is a premium washable waterborne coating for interior and exterior smooth wallboards and panels where a hardwearing blackboard coating is required. Available in black or use Resene FX Chalkboard Paint for a range of Resene colours. Use only with high quality blackboard chalk using a blackboard duster or soft cloth to remove chalk. If you wish to use Liquid Chalk, use a Resene FX Write-On Wall Paint system instead of Resene FX Blackboard Paint. Typical uses: Interior and exterior smooth wallboards and panels where a hardwearing blackboard paint coating is required. |
|
Resene FX Chalkboard Paint Resene FX Chalkboard Paint is a premium washable waterborne coating for interior and exterior smooth wallboards and panels where a hardwearing chalkboard coating is required. Available tinted to a range of Resene colours, or for black use Resene FX Blackboard Paint. Use only with high quality blackboard chalk using a blackboard duster or soft cloth to remove chalk. If you wish to use Liquid Chalk, use a Resene FX Write-On Wall Paint system instead of Resene FX Chalkboard Paint. Typical uses: Interior and exterior smooth wallboards and panels where a hardwearing blackboard paint coating is required. |
|
Resene FX Fluoro There’s nothing quite like a shot of fluorescent to really make something stand out and attract attention. Recreate the high vis highlighter pen look on walls and art with Resene FX Fluoro paint. Available in five colours - blue, green, yellow, orange and pink. Typical uses: Ideal for use for after dark events and locations with blacklight, or for a striking finish during the day. |
|
Resene FX Metallic (was known as Resene Enamacryl Metallic) Resene FX Metallic is a breakthrough product that may be used in all those areas traditionally reserved for solventborne enamels to achieve a metallic effect. Typical uses: Architraves, bathrooms, furniture, kitchens, laundries, plywood, skirtings, timber doors, wallboards, window frames. View recommended application techniques available on the Resene Metallics & Special Effects chart or online. |
|
Resene FX Paint Effects Medium Resene Paint Effects Medium is a tintable acrylic used to obtain a variety of broken paint finishes, such as Ragging, Sponging and Limewash Effect. Resene Paint Effects Medium is always used in conjunction with a basecoat tinted to a selected colour. The choice of basecoat will depend whether it is an interior or exterior application. Resene Paint Effects Medium provides the end user with a unique alternative to traditional wallcoverings offering an infinite number of colour combinations. Typical uses: Blockwork, concrete, fibre cement, G.R.C. panels, primed timber, solid plaster, wallboards. |
|
Resene FX Pearl Shimmer Resene Pearl Shimmer is a waterborne pearlescent glaze ideal for creating shimmering wall finishes and softly sparkled features to add visual interest and diversity to any colour scheme. Resene Pearl Shimmer is always used in conjunction with a basecoat tinted to a selected colour. The choice of basecoat will depend on whether it is an interior or exterior application. Resene Pearl Shimmer may be applied over a wide variety of substrates, including trim and joinery, offering the user an almost infinite selection of colours. The most accentuated pearlescent effect will be achieved in combination with a textured basecoat, a well-planned lighting scheme and/or a curved surface. As the final appearance will vary depending on the basecoat colour and method of application, always test and confirm a sample panel before completing the full project. Typical uses: Architraves, bathrooms, cementitious surfaces, furniture, kitchens, laundries, paperfaced plasterboard (GIB®, Gyprock®), plywood, skirtings, timber doors, wallboards, window frames. |
G
|
Resene Grassmarking Paint Resene Grassmarking Paint is a waterborne paint suitable for marking out lines and field areas on grass without harming the grass itself. Depending on the concentration required, Resene Grassmarking Paint may be thinned by 2-3 parts water making it a cost-effective option for all field marking projects. Typical uses: Grass. |
H
|
Resene Hi-Glo Resene Hi-Glo is based on a unique waterborne emulsion for ease of application and maximum life over primed timber and galvanised steel surfaces. Ideally suited for direct application to cementitious surfaces. Resene Hi-Glo has a high gloss finish that allows for ease of cleaning as dirt and salts can be washed off more easily than lower gloss finishes. Available in a wide range of Resene colours and a selected range of Micaceous and Aluminium metallic finish for added durability. Typical uses: Aluminium, block and brickwork, concrete and plaster, fibre cement, galvanised steel roofing and cladding, particle board, plywood, repaints, roughcast/stucco, timber, UPVC surfaces, weatherboards, Zincalume. |
|
Resene Hi-Glo CoolColour™ Resene Hi-Glo CoolColour is based on a unique waterborne emulsion for ease of application and maximum life over primed timber and galvanised steel surfaces. Ideally suited for direct application to cementitious surfaces. Resene Hi-Glo CoolColour has a high gloss finish that allows for ease of cleaning as dirt and salts can be washed off more easily than lower gloss finishes. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up, which makes it ideally suited for dark roofing colours. Available in a wide range of Resene colours and a selected range of Micaceous and Aluminium metallic finish for added durability. Typical uses: Aluminium, block and brickwork, concrete and plaster, fibre cement, galvanised steel roofing and cladding, particle board, plywood, repaints, roughcast/stucco, timber, UPVC surfaces, weatherboards, Zincalume. |
L
|
Resene Lumbersider Resene Lumbersider is a waterborne low sheen paint based on a tough waterborne resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Ideal for use on a wide range of exterior projects. Also popular as a fence paint finish. Typical uses: Beams, block and brickwork, concrete and plaster, decks, fibre and particle board, fibre cement, galvanised iron, repaints, stucco/roughcast, timber, wallboards, wallpaper, weatherboards. |
|
Resene Lumbersider CoolColour™ Resene Lumbersider is a waterborne low sheen paint based on a tough waterborne resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Ideal for use on a wide range of exterior projects. Also popular as a fence paint finish. Resene Cool Colour technology performs optimally on dark colours that are the most prone to heat build-up. Typical uses: Beams, block and brickwork, concrete and plaster, decks, fibre and particle board, fibre cement, galvanised iron, repaints, stucco/roughcast, timber, weatherboards. |
|
Resene Lustacryl Resene Lustacryl is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing and fast drying with easy water clean up. Typical uses: Architraves, bathrooms, furniture, kitchens, laundries, plywood, skirtings, timber doors, wallboards, window frames. |
|
Resene Lustacryl CoolColour™ Resene Lustacryl CoolColour is the result of long, careful, intensive research. This breakthrough product may be used in all those areas traditionally reserved for solventborne enamels. Non-yellowing and fast drying with easy water clean up. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-ups. Typical uses: Window and door trim, panels and joinery. |
|
Resene Lustacryl Kitchen & Bathroom Resene Lustacryl Kitchen & Bathroom combines the benefits of a waterborne enamel with added anti-bacterial silver protection and MoulDefender. This breakthrough product may be used to bring enamel style toughness to broadwall areas, allowing you to get a semi-gloss finish with added protection. So adaptable that it may also be used on joinery and trim. Anti-bacterial silver protection was chosen because it is a safe method of deodorising and sanitising surfaces that come in contact with skin, food and water. Typical uses: Bathrooms, kitchens, laundries, skirtings, timber doors, trim and joinery, window frames. |
N
|
Resene Non-Skid Deck & Path A short shower or errant splash and swimming pool surrounds, decked areas and steps can become dangerous. Surfaces that were non-slip when dry suddenly become a slippery slide when water or wet feet are added to the equation. Resene Non-Skid Deck & Path is a textured waterborne finish, designed to provide a comfortable walking surface for all interior and exterior situations where a non-skid finish is desired. Available in a desirable low sheen finish, Resene Non Skid Deck & Path may be tinted to complement existing dècor, both inside and out. The finish has a comfortable grit texture to give feet and shoes something to grip onto, reducing the risk of accident no matter what the weather. Typical uses: Bitumen, concrete, decks, paths, steps, timber, foot trafficable areas. |
R
|
Resene Room Velvet Resene Room Velvet dries to a beautiful, even, silky low sheen finish. Based on a tough flexible hybrid waterborne-alkyd resin to give fast drying and durability in all hardwearing areas. This lower odour formulation is easy to apply and dries without the unwanted and strong solvent odours associated with traditional solventborne products. Typical uses: Walls and ceilings especially in wet areas such as bathrooms, kitchens and laundries, architraves, plywood, skirtings, wallboards. Note: Resene Room Velvet was originally available as a low sheen enamel finish, but has been reformulated and released as a waterborne alkyd version in Spring 2019. Make sure you read the correct instructions for the product you are using. To view the old label, old SDS and old TDS, please click here. |
S
|
Resene Sonyx 101 Resene Sonyx 101 is a member of a new generation family of waterborne coatings optimised for superior toughness, durability and adhesion, combined with superb flowing good looks. Resene Sonyx 101 is the perfect compromise for a less than perfect exterior substrate balancing the need for cleanability with an ability to hide surface imperfections. Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, primed galvanised steel, primed timber, solid plaster, wallboards. |
|
Resene Sonyx 101 CoolColour™ Resene Sonyx 101 is a member of a new generation family of waterborne coatings optimised for superior toughness, durability and adhesion, combined with superb flowing good looks. Resene Sonyx 101 is the perfect compromise for a less than perfect exterior substrate balancing the need for cleanability with an ability to hide surface imperfections. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up. Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, primed galvanised steel, primed timber, solid plaster. |
|
Resene SpaceCote Flat Resene SpaceCote Flat is designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Very adaptable, it can also be used on interior wet areas. It may also be used in projects where an open plan living area extends into an 'exterior' sheltered/roofed living area where a seamless finish is desired for both areas. Typical uses: Architraves, bathrooms, ceilings, furniture, kitchens, laundries, plywood, skirtings, timber doors, wallboards, window frames. |
|
Resene SpaceCote Flat CoolColour™ Resene SpaceCote Flat is designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up. Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, primed timber, solid plaster. |
|
Resene SpaceCote Flat Fly Deterrent Resene SpaceCote Flat Fly Deterrent brings style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. It is designed to discourage flies from sitting on areas painted with this product minimising the appearance of fly spots and keeping the paint finish looking its best for longer. Extensive testing by an accredited laboratory has shown significant reductions in the number and size of fly spots compared to standard paint systems. Musca domestica, the housefly, is a well known cosmopolitan pest responsible for transporting disease carrying organisms and damaging surfaces. When resting, adults regurgitate a liquid that results in spots on the surface combined with other darker spots, both of which can be difficult to remove without damaging the paint surface. The flies are inactive at night and tend to congregate on ceiling areas. The less flies sit, the fewer and smaller the fly spotting. Resene SpaceCote Flat Fly Deterrent combines all the benefits and performance of Resene SpaceCote with the added bonus of reduced fly spotting. Available exclusively from Resene in white and a wide range of colours off white. Typical uses: Architraves, ceilings, plywood, skirtings, wallboards, window frames. |
|
Resene SpaceCote Flat Kitchen & Bathroom Resene SpaceCote Flat Kitchen & Bathroom combines the benefits of a waterborne enamel with added anti-bacterial silver protection and MoulDefender. Designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Very adaptable, it can also be used on interior wet areas. Anti-bacterial silver protection was chosen because it is a safe method of deodorising and sanitising surfaces that come in contact with skin, food and water. Typical uses: Bathrooms, ceilings, kitchens, laundries. |
|
Resene SpaceCote Flat Commercial Spray Grade Resene SpaceCote Flat Commercial Spray Grade is designed to bring enamel style toughness to broadwall areas, allowing you to get a desirable flat finish without sacrificing durability. Designed for efficient spray application to enable quicker job completion. Adaptable and suitable for a wide range of projects, including interior wet areas. Typical uses:Bathrooms, furniture, kitchens, laundries, plywood, skirtings, wallboards. |
|
Resene SpaceCote Low Sheen Resene SpaceCote Low Sheen is the result of long, careful, intensive research. This breakthrough product may be used to bring enamel style toughness to broadwall areas, allowing you to get a low sheen finish without sacrificing durability. Very adaptable, it can also be used on interior wet areas. Reduced side sheen minimises the appearance of surface imperfections, although Resene Broadwall Surface Prep or Resene Broadwall 3 in 1 must still be used as a skim coat to achieve a Level 5 finish. Typical uses: Architraves, bathrooms, furniture, kitchens, laundries, plywood, skirtings, wallboards, window frames. |
|
Resene SpaceCote Low Sheen Kitchen & Bathroom The daily rigours of bathrooms, laundries and kitchens results in these areas being prone to bacteria and mould build up. Recognising that these areas sometimes require extra special treatment against these organisms, Resene SpaceCote Low Sheen Kitchen & Bathroom combines the benefits of a popular low sheen waterborne enamel with added anti-bacterial silver protection and the mould protection of MoulDefender. This breakthrough product may be used to bring enamel style toughness to broadwall areas, allowing you to get a low sheen finish with added protection. Very adaptable, it can also be used on interior wet areas. Anti-bacterial silver protection was chosen because it is a safe method of deodorising and sanitising surfaces that come in contact with skin, food and water. Typical uses: Bathrooms, kitchens, laundries, trim and joinery, window frames. |
|
Resene Summit Roof Commercial Spray Satin Resene Summit Roof Commercial is a spray only version, designed for ease of spray application and maximum life over properly prepared metal surfaces and cementitious surfaces. Typical uses: On properly prepared cementitious surfaces, properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume), well weathered COLORBOND® or COLORSTEEL®, roofs. Use with Resene Summit Roof Commercial Brushing Additive when applying by brush, for small areas only. |
|
Resene Summit Roof Commercial Spray Satin CoolColour Resene Summit Roof Commercial is a spray only version, designed for ease of spray application and maximum life over properly prepared metal surfaces and cementitious surfaces. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up. Typical uses: On properly prepared cementitious surfaces, properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume), well weathered COLORBOND® or COLORSTEEL®, roofs. Use with Resene Summit Roof Commercial Brushing Additive when applying by brush, for small areas only. |
|
Resene Summit Roof Metallic Resene Summit Roof Metallic is a waterborne roof paint available in micaceous iron oxide (MIOX) and aluminium finishes designed for ease of application and maximum life. Typical uses: Direct to properly prepared cementitious surfaces, properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume), well weathered COLORBOND® or COLORSTEEL®, roofs. |
|
Resene Summit Roof Semi-Gloss Resene Summit Roof is a unique waterborne semi-gloss for ease of application and maximum life over properly prepared metal surfaces and cementitious surfaces. It’s available in a wide range of colours including Resene paint matches to popular COLORSTEEL®/COLORBOND® colours plus a whole host of Resene colours. Typical uses: On properly prepared cementitious surfaces, properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume), well weathered COLORBOND® or COLORSTEEL®, roofs. Use with Resene Summit Roof Spray Additive when applying by airless spray. |
|
Resene Summit Roof Semi-Gloss CoolColour™ Resene Summit Roof is a unique waterborne semi-gloss for ease of application and maximum life over properly prepared metal surfaces and cementitious surfaces. It’s available in a wide range of colours including Resene paint matches to popular COLORSTEEL®/COLORBOND® colours plus a whole host of Resene colours. Resene CoolColour technology performs optimally on dark colours that are the most susceptible to heat build-up. Typical uses: Direct to properly prepared cementitious surfaces, properly prepared metals (aluminium, galvanised iron, mild steel or Zincalume), well weathered COLORBOND® or COLORSTEEL®, roofs. Use with Resene Summit Roof Spray Additive when applying by airless spray. |
T
|
Resene Tennis Court Coating Resene Tennis Court coating is a waterborne coating filled with graded silicas. Designed for use on both concrete and composite courts to give a durable, tough topping with excellent traction and even bounce properties. Typical uses: Bitumen, concrete, tennis courts. |
W
|
Resene Walk-on Resene Walk-on is a satin general purpose flooring and paving paint, based on tough acrylic resins to give maximum durability and abrasion resistance in a single pack finish. It’s ideal for use on steps, decking, concrete, porches, suitably primed timber, composite boards and interior floors. This product has replaced solventborne and waterborne Resene Sidewalk. Typical uses: Composite board, concrete, decks, fibre cement, particle board, steps, timber, foot trafficable areas. |
|
Resene Walk-on CoolColour™ Resene Walk-on is a satin general purpose flooring and paving paint, based on tough acrylic resins to give maximum durability and abrasion resistance in a single pack finish. It’s ideal for use on steps, decking, concrete, porches, suitably primed timber, composite boards and interior floors. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up, which makes it ideally suited for dark colours outside. This product has replaced solventborne and waterborne Resene Sidewalk. Typical uses: Composite board, concrete, decks, fibre cement, particle board, steps, timber, foot trafficable areas. |
|
Resene Wintergrade Lumbersider Resene Wintergrade Lumbersider is designed to cure at very low temperatures down to 3°C. Based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Ideal for use on a wide range of exterior projects. Also popular as a fence paint finish. Typical uses: Beams, block and brickwork, concrete and plaster, decks, fibre and particle board, fibre cement, galvanised iron, repaints, roughcast/stucco, timber, wallboards, wallpaper, weatherboards. |
|
Resene Wintergrade Sonyx 101 Resene Wintergrade Sonyx 101 is designed to cure at very low temperatures down to 3°C. Based on a tough waterborne resin to ensure maximum durability in all exposed conditions. Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, primed galvanised steel, primed timber, solid plaster, wallboards. |
Z
|
Resene Zylone Sheen Resene Zylone Sheen is the result of advanced technology that produces a smooth yet ultra tough surface. Drying to an attractive low sheen finish, its ease of application, washability and durability make it an ideal choice for interior use. A very low odour product. Typical uses: Block and brickwork, concrete and plaster, fibre and particle board, fibre cement, fibrous plaster, paperface plasterboard (GIB®, Gyprock®), timber, wallpaper, wallboards, woven wallcoverings. |
|
Resene Zylone Sheen Zero - with no added VOCs Resene Zylone Sheen Zero is the result of advanced technology that produces a smooth yet ultra tough surface. Drying to an attractive low sheen finish, its ease of application, washability and durability make it an ideal choice for interior use. A very low odour product with no added VOCs. Typical uses: Block and brickwork, concrete and plaster, fibre and particle board, fibre cement, fibrous plaster, paperface plasterboard (GIB®, Gyprock®), timber, wallpaper, wallboards, woven wallcoverings. |
Environmental Choice approved
|
Resene Aquaclear Resene Aquaclear has been developed as a waterborne alternative to turps thinned oil modified urethanes. Where maximum abrasion resistance is required, such as high traffic floors, a moisture-cured urethane, such as Resene Polythane, is recommended. Typical uses: Cork, desks, doors, fibre and particle board, furniture, panelling, parquet, skirtings, solid timber, veneers. |
|
Resene Aquaclear Natural Resene Aquaclear Natural is a waterborne clear flat finish for interior timber walls and ceilings, designed to enhance and protect timber from everyday wear and tear. May also be used with Resene Colorwood Enhance to add extra depth and colour to timber. Available in a flat natural finish to allow the beauty of the timber to show through. Typical uses: Interior timber walls and ceilings. |
|
Resene AquaLAQ Clear Coat Resene AquaLAQ Clear Coat is a single pack, waterborne clear available in matte, satin and gloss. It has excellent coverage and dries extremely fast under the correct conditions to a hard durable finish with excellent UV resistance. Enjoy low odour and low VOC with this product. Recommended over Resene AquaLAQ Colour Coat where extra durability or a change in gloss levels is required. Typical uses: Kitchens, bathrooms, shop fittings, doors, furniture, blinds. Usually used by professional spray applicators. Recommended as part of the Resene AquaLAQ system – find out more about Resene AquaLAQ. |
|
Resene Cemseal Bare industrial and domestic concrete floors can be a dust trap becoming increasingly difficult to clean as dust collects in the undulations of the surface that are but invisible to the naked eye. Concrete surfaces are best protected early in their service life before ongoing maintenance becomes difficult. Resene Cemseal is a clear concrete sealer and dust coat, a non-decorative coating designed for use on interior and exterior industrial and domestic concrete floors and trafficable areas where a low cost, easily applied and maintained method of controlling concrete dusting is required. Quick and easy to apply, Resene Cemseal imparts clear protection to a wide range of concrete applications. Typical uses: Concrete. |
|
Resene Clearcoat UVS We all know how damaging UV light can be. On hot summer days, human skin will burn in less than 10 minutes, at which time most of us will rush away to a nice patch of shade. Exterior paintwork does not have this luxury as it is left outside to withstand relentless UV light from the day it is applied. UV light gradually breaks down vulnerable pigments in the final topcoat resulting in a faded paint finish. Bright organic hues, such as reds, are more prone to this than hues based on durable oxides. Resene Clearcoat UVS is based on a unique acrylic-urethane for ease of application and maximum life over painted surfaces. To help protect exterior painted surfaces from colour fade, Resene Clearcoat UVS is formulated with UV absorbers to filter out harmful UV light, protecting the underlying coloured coat. Ideally suited for direct application to freshly painted bright organic hues and shades to aid colour retention by protecting these more vulnerable pigments against fading. While Resene Clearcoat UVS is not designed for use on working joinery, such as windows and doors, as it is a waterborne finish, its outstanding flexibility over timber makes it suitable for use on weatherboards. It has excellent adhesion to Resene topcoats and can be easily overcoated at a later date with other Resene waterborne paints. This product has replaced Resene Sun Defier. While Resene Clearcoat UVS is the ideal product to protect against colour fade, if the colour chosen is prone to chalking rather than fading, Resene Concrete Clear is the recommended product to use. Typical uses: All exterior waterborne acrylic coated surfaces except working joinery. |
|
Resene Colorwood Resene Colorwood is an exciting way of treating natural timbers and enhancing the grain. Gives coloured timbers with the see-through look as it allows the natural grain of all timbers to show through. All colours can be intermixed, allowing you to create your own colours – always keep a note of any intermix recipes so you can recreate them if you need more. The finished colour is influenced by the timber colour itself, the denseness of the timber and the length of time the stain is left before the excess is wiped off. Always test Resene Colorwood on a small off-cut of timber to ensure the desired colour is being achieved. Strong colours may be difficult to achieve on hardwood and heart timbers due to lack of penetration. If the selected colour is too strong, reduce with Resene Colorwood Reducing Base. Resene Colorwood is very easy to apply by brush or rag. For best results, wipe excess Resene Colorwood off with a dry, absorbent, lint free cloth, rubbing along the grain. This also ensures maximum adhesion of topcoats. Overcoating is recommended to ensure the timber is protected and to maximise the longevity of the finish. Resene Colorwood is easily overcoated with Resene Aquaclear, Resene Qristal ClearFloor 1K, Resene Qristal Polyurethanes or Resene Polythane. Typical uses: Canework, cork, doors, dressed and rough sawn timber, fibre and particle board, furniture, kitset and nursery furniture, panelling, rope, timber (imported and native), timber ceilings and beams, window and door frames. |
|
Resene Colorwood Greywash Resene Colorwood Greywash is designed to give a greywash effect on new timber or old varnished interior timbers. It’s based on Resene Colorwood Whitewash but with extra black tint, that scandi whitewash look becomes a softer greywashed look. It's available in two standard finishes or you can create your own greywash intensity by applying tinted Resene Colorwood stain first, then overcoating with Resene Colorwood Greywash. Typical uses: Cork, desks, doors, fibre and particle board, furniture, panelling, parquet, skirtings, solid timber, veneers. |
|
Resene Colorwood Whitewash Resene Colorwood Whitewash is an exciting way of achieving a whitewash effect on new timber or old varnished interior timbers. Typical uses: Cork, desks, doors, fibre and particle board, furniture, panelling, parquet, skirtings, solid timber, veneers. |
|
Resene Concrete Clear Resene Concrete Clear is a tough waterborne glaze for use on masonry and brick surfaces to enhance its colour and natural beauty. It also increases the durability of high build waterborne specialist coatings. Resene Concrete Clear can also be used over solid colour or metallic decorative paint finishes. Available in gloss, satin and flat. Typical uses: Brickwork/artificial brickwork, fibre cement, high build acrylics, masonry surfaces, plaster. |
|
Resene Concrete Wax Resene Concrete Wax is a tough waterborne satin glaze for use on concrete floors and benchtops. Scratches are easily repairable and the surface maintained. Typical uses: Concrete benchtops, concrete floors. |
|
Resene Forester Resene Forester is a semi-transparent film forming timber stain effect finish based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Resene Forester is not suitable for direct application over timber and other bare substrates. It is designed for use over a specific basecoat colour on properly prepared substrates and particularly those with a wood grain effect. Also available with Resene CoolColour™ technology. Typical uses: Pre-primed Shadowclad® Ultra, wood grain effect fibre cement, repaints, primed timber, primed weatherboards. |
|
Resene Forester CoolColour Resene Forester CoolColour is a semi-transparent film forming timber stain effect finish based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Imparts a natural low sheen look that is fully washable. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up. Typical uses: Pre-primed Shadowclad® Ultra, wood grain effect fibre cement, repaints, primed timber, primed weatherboards. |
|
Resene SpaceCote Clear Resene SpaceCote Clear is a low sheen clear finish, designed to bring enamel style toughness to broadwall areas, allowing you to get a low sheen finish without sacrificing durability. Ideal to protect interior wall paints and Mason wallpaper. A durable low odour finish with scuff, scrub and burnish resistance. Typical uses: Over paint finishes and Mason wallpaper. |
|
Resene Walk-on Concrete Clear Resene Walk-on Concrete Clear is based on tough waterborne resins to give maximum abrasion resistance in a single pack satin finish on concrete surfaces subject to foot traffic. Typical uses: Exterior domestic surfaces and light industrial surface areas. |
|
Resene Waterborne Woodsman Sick of faded stained weatherboards or drab timber finishes? Neither does justice to any home or project exterior and they can both easily be remedied by the application of Resene Waterborne Woodsman. Resene Waterborne Woodsman is an exterior wood stain designed to colour timber, while still allowing the natural grain of the timber to show through. It is an easy way to add colour to new or previously stained timber without losing its natural beauty. Designed for exterior timber in a wide range of colours. Decorators will enjoy the quick and easy water clean up and the absence of the solvent fumes and VOCs associated with traditional solventborne stains. Easy to apply with minimal surface preparation required. Formulated with powerful fungicides for improved mould resistance. Stains are transparent, so the final finish colour will depend on the nature of the timber being stained. Stains applied to light woods will appear much stronger and brighter in colour than stains applied to dark wood. As with any finishing project – regardless of the products being used – always go through the entire finishing process using scraps from the project before committing to the colour. Preferred colours can be easily tested on a representative piece of wood using Resene Waterborne Woodsman testpots. Resene does not recommend clear stains on exterior timber as they do not provide sufficient protection for the timber against the weather. If you'd like a clear style finish we recommend you choose a stain colour close to your natural timber stain colour to provide protection and a look in keeping with the original. Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. New formula version can be used on exterior wooden furniture. |
|
Resene Waterborne Woodsman CoolColour™ Resene Waterborne Woodsman is a waterborne woodstain matching the needs of timber to the desire to achieve the most natural appearance possible. Resene CoolColour technology performs optimally on dark colours that are the most prone to heat build-up. Designed for exterior timber in a wide range of colours. Resene does not recommend clear stains on exterior timber as it does not provide sufficient protection for the timber against the weather. Easy to apply with minimal surface preparation required. Formulated with powerful fungicides for improved mould resistance. Like pigmented CoolColour hues, Resene Waterborne Woodsman CoolColour finishes retain their normal visible colour but reflect heat from the surface, reducing stress on the coating and substrate and subsequent heat related damage improving the longevity of each. The technology also minimises build up of unwanted heat in the building reducing airconditioning and cooling costs. In short, the colour looks the same as normal but reflects much more heat than normal so doesn't get as hot as the standard colour would. Those who remember the introduction of the then new Cricket NZ black shirts will remember discussions of the new technology that stopped the shirts absorbing the heat a black shirt normally would, a heat that would be unbearable for cricket players. Resene CoolColour paint technology works on a similar premise, but instead of protecting cricketer's backs Resene CoolColour technology protects houses and buildings instead. Resene CoolColour technology is generally best suited to colours that have black in their make-up as these tend to absorb the most heat. Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. New formula version can be used on exterior wooden furniture. |
|
Resene Woodsman Decking Oil Stain Tired weathered timber decks can be quickly rejuvenated with new Resene Woodsman Decking Oil Stain, a hybrid waterborne alkyd stain developed especially for new and weathered decking. Resene Woodsman Decking Oil Stain is available in a wide range of colours including Resene CoolColours. Resene does not recommend clear stains on exterior timber as it does not provide sufficient protection for the timber against the weather. Easy to apply with minimal surface preparation required. Formulated with powerful fungicides for improved mould resistance. Typical uses: Timber decks. |
|
Resene Woodsman Greywash Resene Woodsman Whitewash is an exciting way of achieving a greywash effect on new or weathered exterior timber. It’s based on Resene Woodsman Whitewash but with extra black tint, that scandi whitewash look becomes a softer greywashed look. It's available in two standard finishes or you can create your own greywash intensity by applying tinted Resene wood stain first, then overcoating with Resene Woodsman Greywash. Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. New formula version can be used on exterior wooden furniture and decks. |
|
Resene Woodsman Whitewash Resene Woodsman Whitewash is an exciting way of achieving a whitewash effect on new or weathered exterior timber. Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. New formula version can be used on exterior wooden furniture and decks. |
|
Resene XC-700 Resene XC-700 is a clear high build finish designed to seal concrete and masonry walls for a lightly textured 'natural look' finish. This is a controlled distribution product - see your Resene representative or Resene ColorShop. Typical uses: Concrete masonry, honed concrete walls. |
Environmental Choice approved
|
Resene Aquapel Resene Aquapel is a clear water repellent treatment formulated to help control efflorescence and give a long-term water-beading effect to deter water penetration. It may be used on its own or as a primer under waterborne coatings, especially Resene AquaShield mineral effect. The product is ideal as a clear finish over concrete to maintain the natural appearance while still providing it with some protection against the elements and slowing down the growth of mould, lichen and the like as these organisms will find it more difficult to grow on the coated surface than on an uncoated one. Typical uses: Most porous building materials. May be used in multiple coats to keep concrete in its natural state looking good for longer by minimising the opportunity for moss, mould and lichen growths, brick, concrete block, fibrous cement, poured concrete, tilt slab, timber. |
|
Resene Masonry Flat Resene Masonry Flat is a premium quality, self-priming exterior waterborne coating designed for direct application to porous masonry surfaces. It imparts a unique and even matt side sheen finish with very low light reflectively, which helps provide a uniform surface appearance on substrates such as cement render, brick and concrete block. Available in Australia only. Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, monolithic building systems, solid plaster. |
|
Resene Resitex - Standard, Medium, Coarse Resene Resitex is a tough waterborne textured spray finish with excellent adhesion and flexibility, available in three grades Resene Resitex Coarse - 880 micron deeply textured rugged texture, Resene Resitex Medium - 500 micron heavy Mediterranean texture and Resene Resitex Standard - 300 micron light Mediterranean texture. These textures effectively disguise the imperfections and surface blemishes of a substrate without detracting from the architectural concept. Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, monolithic building systems, primed galvanised steel, solid plaster, suitably primed wallboards. |
|
Resene Resitex Plastercote Resene Resitex Plastercote is an elastomeric acrylic specialist finish perfect for creating a Mediterranean style effect, yet tough enough to withstand the harsh environment. Based on tough acrylic elastomers that have an excellent 'memory' of their original shape when distorted. Improved dirt pick-up resistance and crack bridging properties are also of significant benefit. Ideally suited for structures that will flex and develop minor cracks. Protects flexing structures from concrete carbonisation by maintaining a seal over the cracks that develop. Resene Resitex Plastercote may be applied to reproduce a sponge plaster finish associated with Mediterranean architecture through to a scratch plaster finish (worm tracks) depending on application technique (spray or trowel), aggregate size and spreading rate. Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, monolithic building systems, primed galvanised steel, solid plaster, suitably primed wallboards. |
|
Resene Sandtex Resene Sandtex is a tough waterborne textured spray finish for beautifying and protecting concrete structures. It has a fine texture of 150 microns and is often used recreate the texture of natural sandstone. Inherently durable, it may also be used to create lightly textured effects is ideal for use when disguising minor surface imperfections. The time-worn strength of sandstone with the mellow patina of age has been recreated in Resene Sandtex. Perfect for beautifying and protecting concrete, this very versatile finish can be used to reproduce a variety of finishes from aged render effects through to natural limestone and sandstone finishes. The fine sandstone texture adds an extra dimension to the coating and effectively disguises minor surface blemishes without changing the basic architectural concept. The combination of strong colour and texture can transform an ordinary surface into an architectural feature, making it a very popular choice for feature walls. Resene Sandtex may be applied by roller, spray or brush. A popular brush application method is to crows foot the coating, applying it by wide brush in a criss cross pattern to give a tactile brushed Mediterranean look. Use Resene Sandtex with a basecoat of Resene Lumbersider tinted to the Resene Sandtex topcoat colour to ensure uniformity of the finish. Some applicators may find it easier to apply a fine coat of Resene Sandtex so that the subsequent coat of Resene Sandtex will have something to grip onto. An excellent basecoat for Paint Effects Medium as the texture adds an extra dimension to the effect. Resene Sandtex also provides an ideal basecoat for creating Mediterranean style effects. The texture in Resene Sandtex adds an extra dimension to the paint effect. Its effect is not dissimilar to traditional limewashes or cement based paints. Typical uses: Block and brickwork, concrete, fibre cement, G.R.C. panels, monolithic building systems, primed galvanised steel, solid plaster, wallboards. |
|
Resene Water Lockout Resene Water Lockout is a versatile high build liquid watertight membrane based on a urethane modified bitumen emulsion. It cures to a seamless highly elastic and durable film that adheres well to most substrates to block water ingress. Typical uses: Masonry – walls, in situ concrete - walls/floors, plastered/rendered walls, retaining walls, wood planter box interiors. |
|
Resene X-200 Looking for a resilient exterior coating that is highly water resistant, possesses excellent adhesion and stretch characteristics and looks as good as it performs? Then choose Resene X-200 and enjoy a quality of finish that buildings all over the country have been enjoying for years. Resene X-200 uniquely combines low viscosity with high build ensuring excellent penetration into cracks and pores, superb adhesion and durability. It develops into a tough, durable and continuous membrane, while its fibre reinforcement increases tensile strength. Resene X-200 is a popular choice for refurbishments in areas prone to earthquakes and for concrete buildings nationwide. It may be used on its own or under Resene textures such as Resene Resitex or Resene Sandtex. It is perfect on concrete, blockwork, fibre cement sheeting and solid plaster, where weathertightness is required. Resene X-200 may be brushed into small cracks (less than 1mm) to prevent moisture entering the damaged substrate. For cracks 1-2mm use Resene Brushable Crack Filler or a suitable sealant. Resene X-200 has a low sheen, slightly textured finish, in keeping with current trends for lower gloss finishes. It is easily applied and has excellent durability. Typical uses: Concrete blocks, concrete surfaces, fibre reinforced cement. |
|
Resene X-200 CoolColour Looking for a resilient exterior coating that is highly water resistant, possesses excellent adhesion and stretch characteristics and looks as good as it performs? Then choose Resene X-200 and enjoy a quality of finish that buildings all over the country have been enjoying for years. Resene X-200 uniquely combines low viscosity with high build ensuring excellent penetration into cracks and pores, superb adhesion and durability. It develops into a tough, durable and continuous membrane, while its fibre reinforcement increases tensile strength. Resene X-200 is a popular choice for refurbishments in areas prone to earthquakes and for concrete buildings nationwide. It may be used on its own or under Resene textures such as Resene Resitex or Resene Sandtex. It is perfect on concrete, blockwork, fibre cement sheeting and solid plaster, where weathertightness is required. Resene X-200 may be brushed into small cracks (less than 1mm) to prevent moisture entering the damaged substrate. For cracks 1-2mm use Resene Brushable Crack Filler or a suitable sealant. Resene X-200 has a low sheen, slightly textured finish, in keeping with current trends for lower gloss finishes. It is easily applied and has excellent durability. Selected colours available in Resene CoolColour technology to reflect more heat than the standard versions of the colour. Resene CoolColours perform optimally on dark colours that are the most prone to heat build-up. Typical uses: Concrete blocks, concrete surfaces, fibre reinforced cement. |
|
Resene X-300E Resene X-300E is a thixotropic weathertight membrane designed for thick application over cracked concrete surfaces. Thixotropic means it is a coating material that, while free-flowing and easy to manipulate under the brush, sets to a gel within a short time when it is allowed to remain at rest. It is made using acrylic elastomers that have excellent 'memory' of their original shape when distorted, which gives the product incredible movement and crack bridging capabilities, enabling it to bridge gaps up to half the thickness of the paint film. Resene X-300E performs well over badly cracked and deteriorating substrates and is therefore recommended over propagating cracks - that is, when cracks are getting worse and/or new ones are appearing. This product will resolve many less than perfect substrates, but is not recommended on very poor substrates. It is able to be applied at very high thicknesses without sagging or film cracking. Resene X-300E has a semi-gloss finish but like all elastomeric coatings is more prone to dirt pickup than standard coatings. This may be easily overcome with a final coat of a standard waterborne topcoat such as Resene Lumbersider or Resene X-200 weathertight membrane. Typical uses: Concrete road bridges, high rise concrete buildings, all other cementitious surfaces. |
|
Resene X-400 Resene X-400 is a semi-gloss waterborne weathertight membrane, with superior small void and crack filling properties, designed for thick application over concrete surfaces. It may be applied at very high thicknesses without sagging or film cracking. Resene X-400 may be applied with a goop loop roller to achieve a high textured finish, with a standard roller for a less textured finish or by spray. With Resene X-400 you get the dual benefits of texture and weathertightness in one product combined with better washability and reduced dirt pickup compared to elastomeric coatings. Shows similar characteristics to the industry yardstick Resene X-200 in terms of adhesion, ease of application and durability. Replaces Resene Thixalon 5. Typical uses: All cementitious surfaces, concrete, blockwork, fibre cement sheeting, solid plaster and on cracked substrates where weathertightness is required. Brushed into small cracks it will prevent moisture entering the damaged substrate. |
Environmental Choice approved
|
Resene Art Action Art & Poster Paint Resene Art Action Art & Poster Paint is a permanent, durable acrylic paint designed specifically for general use in home, classroom and business artwork. Suitable for use by both children and adults. If a higher quality paint is required, use Resene Art Action Student Acrylic. Resene Art Action Tempera is recommended for younger children. |
|
Resene Art Action Student Acrylic Resene Art Action Student Acrylic is a high quality, permanent, durable acrylic paint designed for home, classroom and business artwork. Suitable for use by both children and adults. Resene Art Action Tempera is recommended for younger children. |
|
Resene Art Action Tempera Resene Art Action Tempera is designed specifically for use on home or classroom artwork. Ideal for younger children (3 years or older). A good value option for non-permanent artwork, posters and pictures that will be protected from moisture. If a higher quality, more permanent paint is required, use Resene Art Action Student Acrylic. |
|
Resene FilmPro Resene FilmPro is a tough waterborne finish designed to colour and enhance sets. Available in a standard range of colours, digital blue and green and reduction and clear bases. |
|
Resene TagCover Resene TagCover is a custom made range of waterborne satin paints formulated to provide a budget friendly paint system to cover graffiti. Available in a standard colour range in 10L pails. Other sizes and colours available on request. Minimum quantities may apply. Typical uses: Concrete, plaster, timber. |
Environmental Choice approved
|
Crown Landscape – Black, Cedar, Kauri Crown Landscape is a waterborne stain designed to enhance, protect and rejuvenate exterior timber in landscaping, such as fences, retaining walls and decorative landscaping features. Available in three colours – Black, Cedar and Kauri. |
|
Crown Crown products with Environmental Choice approval are: Crown Fence Paint, Crown Acrylic Gloss Acrylic, Crown Low Sheen Acrylic, Crown Roof, Crown Timber Colour, Crown Acrylic Wallboard Sealer. Crown is a range of good quality topcoats and primers/sealers designed for budget conscious homeowners and trade customers. Resene premium paints will provide the best long term value, however the Crown range can be ideal where there is a limited budget available. |
Crown roof paints are designed to give a quick drying, durable, high-gloss finish on new primed or previously painted roofs. Good surface preparation is critical to maximise the life of your roof paint system. Clean down all surfaces using Resene Roof and Metal Wash, a concentrated pre-treatment for all new and old unpainted galvanised roofing and a general cleaner for previously painted surfaces including roofing. Wash down with a copious amount of freshwater.
Use Resene Membrane Roofing Primer for all sheet rubber roofing systems and bituminous surfaces.
Handy tip: A good rule-of-thumb for calculating the quantity of roof paint required is: your project's footprint area plus about 40% (allows for roof pitch, corrugations, soffit overhang, etc). Trough section roofing can require significantly more. Typically a complete roof paint system requires surface preparation using Resene Roof Wash and Paint Cleaner, one coat of primer and two coats of topcoat at the recommended coverage rate on the cans.
Environmental Choice approved
|
Resene Decorator Acrylic Primer Undercoat Resene Decorator Acrylic Primer Undercoat provides long term flexibility over unstable substrates coupled with exceptional durability even when left uncoated for prolonged periods. Dries in only 20 minutes and can be recoated in two hours. May be topcoated with waterborne or solventborne systems. Typical uses: Block and brickwork, cement plaster, cloth/woven wallcoverings, composite and fibre board, repaints, timber, wallboards, wallpaper. |
|
Resene Decorator Acrylic Sealer Undercoat Resene Decorator Acrylic Sealer Undercoat is a water reducible first coat for plasterboard walls and air-dry stoppings designed to minimise porosity and textural differences. Excellent holdout of topcoats. Very good opacity. Typical uses: Air dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard. |
|
Resene Decorator Easy Sand Acrylic Wallboard Sealer Resene Decorator Easy Sand Acrylic Wallboard Sealer is a water reducible first coat for plasterboard walls and air-dry stoppings designed to minimise porosity and textural differences. Easily sanded. Typical uses: Air dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard. |
|
Resene Decorator High Cover Acrylic Wallboard Sealer Resene Decorator High Cover Acrylic Wallboard Sealer is a water reducible first coat for plasterboard walls and air-dry stoppings designed to minimise porosity and textural differences. Excellent coverage with good sanding abilities. Typical uses: Air dry (polymer based) stoppings and finishing compounds, paperfaced plasterboard. |
Environmental Choice approved
|
Resene Decorator 100% Acrylic Gloss Resene Decorator 100% Acrylic Gloss is based on a 100% acrylic emulsion for ease of application and maximum life over primed timber and galvanised steel surfaces. Ideally suited for direct application to cementitious surfaces. Typical uses: Aluminium, brickwork, concrete block, fibre cement, galvanised steel roofing and cladding, plywood, repaints, roughcast/stucco, timber, UPVC surfaces, weatherboards. |
|
Resene Decorator Acrylic Ceiling Flat Resene Decorator Ceiling Flat is recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Flow and build properties mean that one coat is often enough to achieve complete hiding. For use in dry areas. Typical uses: Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints. |
|
Resene Decorator Acrylic IE Flat Resene Decorator Acrylic IE Flat is a well proven blend of resins and pigments that combined produces a very flat film. Its ease of application makes it an excellent choice for decorating. Typical uses: Interior – Fibre and particle board, fibrous plaster, paperfaced plasterboard, wallboards, Wallpaper; Exterior – Blockwork, brickwork, cement plaster, concrete, fibre cement, roughcast/stucco. |
|
Resene Decorator Acrylic Low Sheen Resene Decorator Acrylic Low Sheen is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Drying to an attractive low sheen finish, its ease of application, washability and durability make it an ideal choice for both interior and exterior use. Typical uses: Interior – Beams, fibre and particle board, wallboards, wallpaper; Exterior – Blockwork, brickwork, concrete and plaster, fibre cement, primed galvanised steel, repaints, timber. |
|
Resene Decorator Acrylic Semi-Gloss Resene Decorator Acrylic Semi-Gloss is a combination of top quality acrylic emulsions blended with high grade pigment dispersions. Has a proven record of exposure on concrete buildings. Typical uses: Blockwork, brickwork, cement plaster, concrete, fibre cement, roughcast/stucco. |
|
Resene Decorator Interior Ultra Low Sheen Resene Decorator Interior Ultra Low Sheen is based on a tough 100% acrylic resin to ensure maximum durability in all exposed conditions. Drying to an attractive ultra low sheen finish, its ease of application, washability and durability make it an ideal choice for interior use. Typical uses: Beams, fibre and particle board, wallboards, wallpaper. |
|
Resene Decorator Hi-Opacity Ceiling Flat Resene Decorator Hi-Opacity Ceiling Flat recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Flow and build properties mean that one coat is often enough to achieve complete hiding. Hi-opacity, clean white. For use in dry areas. Typical uses: Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints. |
|
Resene Decorator Hi-Op EasyTouch Dead Flat Ceiling Paint Resene Decorator Hi-Op EasyTouch Dead Flat Ceiling Paint is recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Flow and build properties mean that one coat is often enough to achieve complete hiding. For use in dry areas. Easy to touch up if required. Typical uses: Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints. |
|
Resene Decorator Interior Low Sheen Resene Decorator Acrylic Low Sheen is based on a 100% acrylic low odour resin and has been formulated specifically for easy application. This results in an attractive and washable low sheen finish ideal for the majority of interior surfaces. Typical uses: Beams, fibre and particle board, wallboards, wallpaper. |
|
Resene Decorator Premium Roof Resene Decorator Premium Roof is a durable waterborne gloss for ease of application and maximum life over well weathered COLORSTEEL®, COLORBOND® and properly prepared metal surfaces. Typical uses: Primed and properly prepared metal surfaces, well weathered (6 months or more exterior exposure) COLORSTEEL® and COLORBOND®. |
|
Resene Decorator Tintable Ceiling Flat Resene Decorator Tintable Ceiling Flat recommended for use on ceilings of living rooms, bedrooms, and dining rooms where a flat finish is required. Tinter controlled for accurate colour results. For use in dry areas. Typical uses: Ceilings, fibrous plaster, paperfaced plasterboard, plaster glass, repaints. |
Some products or services may not be offered in your area or country. Please check with your local Resene ColorShop for availability. Most products can be ordered on request though lead times and minimum order quantities may apply.
Resene metal packaging includes recycled material and is printed using U.V. inks and varnishes ensuring energy savings and no emissions. A selection of Resene product label artwork is available from this section and is provided as a handy reference. The label on a pack you purchase may differ depending on the age of the stock you are purchasing and when the pack changes over to the newer label artwork. Resene paper labels are printed on environmentally responsible paper, which complies with the requirements of environmental management systems EMAS and ISO14001, using vegetable inks. Resene prints brochures, flyers etc on sustainable paper stocks Resene prints brochures, flyers etc on sustainable paper stocks wherever possible. When you download some pdf files from this website they will refer to being printed on sustainable paper stock. This is because they are an electronic copy of what we distribute to our customers.
Technical information:
How to:
View colour/order:
Can't find what you're looking for? Ask us!
We would love to hear from you if you wish to use Resene's images, information and ideas for social medial, blogs, newsletters and other media use. Please email update@resene.co.nz and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.
Our vision is to be respected as a trusted, ethical and sustainable company and acknowledged as the leading provider of innovative paint and colour technology. View Resene’s profile, Quality Policy, Environmental Policy and Health & Safety Policy.
Any personal data, such as name, address, phone, email details, supplied to Resene for the purposes of receiving newsletters, orders etc will be retained by Resene Paints Ltd and used only by Resene Paints Ltd and its trusted agencies for the purposes of communication/promotion/providing service to you. We do not sell, trade or otherwise transfer your personal data to outside third parties. If you wish to opt out of communication from Resene please complete our contact us form. View our full Privacy Policy.
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.
