From the Resene products section
Can't find what your looking for? Search the full product range...
Please wait until this search results page is fully loaded before making your selection.
Resene Aquaclear Natural Resene Aquaclear Natural is a waterborne clear flat finish for interior timber walls and ceilings, designed to enhance and protect timber from everyday wear and tear. May also be used with Resene Colorwood Enhance to add extra depth and colour to timber. Available in a flat natural finish to allow the beauty of the timber to show through. Typical uses: Interior timber walls and ceilings. Ingredients: Water, Minerals (Amorphous Silica), Resin (APEO free and Formaldehyde free), Silicone Oil, Alcohol, Soap, Preservatives , Non-toxic Trace Ingredients < 0.1%. |
Resene Colorwood Resene Colorwood is an exciting way of treating natural timbers and enhancing the grain. Gives coloured timbers with the see-through look as it allows the natural grain of all timbers to show through. All colours can be intermixed, allowing you to create your own colours – always keep a note of any intermix recipes so you can recreate them if you need more. The finished colour is influenced by the timber colour itself, the denseness of the timber and the length of time the stain is left before the excess is wiped off. Always test Resene Colorwood on a small off-cut of timber to ensure the desired colour is being achieved. Strong colours may be difficult to achieve on hardwood and heart timbers due to lack of penetration. If the selected colour is too strong, reduce with Resene Colorwood Reducing Base. Resene Colorwood is very easy to apply by brush or rag. For best results, wipe excess Resene Colorwood off with a dry, absorbent, lint free cloth, rubbing along the grain. This also ensures maximum adhesion of topcoats. Overcoating is recommended to ensure the timber is protected and to maximise the longevity of the finish. Resene Colorwood is easily overcoated with Resene Aquaclear, Resene Qristal ClearFloor 1K, Resene Qristal Polyurethanes or Resene Polythane. Typical uses: Canework, cork, doors, dressed and rough sawn timber, fibre and particle board, furniture, kitset and nursery furniture, panelling, rope, timber (imported and native), timber ceilings and beams, window and door frames. Ingredients: Water, Minerals (Clay, Feldspar), Resin (APEO free and Formaldehyde free), Mineral Oil, Alcohol, Soap, Preservatives < 0.1%, Non-toxic Trace Ingredients < 0.1%. |
Resene Colorwood Enhance Resene Colorwood Enhance is designed to provide subtle toning shade to interior timbers. Resene Colorwood Enhance can be mixed into waterborne clear finishes, such as Resene Qristal ClearFloor 1K and Resene Aquaclear, and then brush applied as part of that product to enhance the timber substrate. It takes only one pack (80ml) of Resene Colorwood Enhance to shade a litre of clear finish. You choose the level of shading. Available in white, black, jarrah, red brown and walnut tones. Typical uses: As part of a Resene Aquaclear or Resene Qristal ClearFloor finish. Do not mix with Resene Qristal ClearFloor 2K. |
Resene Colorwood Greywash Resene Colorwood Greywash is designed to give a greywash effect on new timber or old varnished interior timbers. It’s based on Resene Colorwood Whitewash but with extra black tint, that scandi whitewash look becomes a softer greywashed look. It's available in two standard finishes or you can create your own greywash intensity by applying tinted Resene Colorwood stain first, then overcoating with Resene Colorwood Greywash. Resene Colorwood is also available in a range of other colours from traditional timber colours to brights. You can also get it tinted to many Resene Woodsman colours for a consistent colour palette inside and outside your project. For a greywashed finish outside use Resene Woodsman Greywash. Typical uses: Cork, desks, doors, fibre and particle board, furniture, panelling, parquet, skirtings, solid timber, veneers. |
Resene Colorwood Whitewash Resene Colorwood Whitewash is an exciting way of achieving a whitewash effect on new timber or old varnished interior timbers. Resene Colorwood is also available in a range of other colours from traditional timber colours to brights. You can also get it tinted to many Resene Woodsman colours for a consistent colour palette inside and outside your project. For a whitewashed finish outside use Resene Woodsman Whitewash. May also be tinted to the Resene 'We Speak Beach' range of wash colours. Typical uses: Cork, desks, doors, fibre and particle board, furniture, panelling, parquet, skirtings, solid timber, veneers. Ingredients: Water, Minerals (Amorphous Silica), Resin (APEO free and Formaldehyde free), Silicone Oil, Alcohol, Soap, Preservatives < 0.1%, Non-toxic Trace Ingredients < 0.1%. |
Resene Qristal ClearFloor 1K Resene Qristal ClearFloor 1K is a waterborne urethane durable satin flooring finish designed to protect your wooden flooring and keep it looking its best for longer. In high abrasion where a waterborne finish is required, use Resene Qristal ClearFloor 2K. Typical uses: Timber or timber composite flooring. May be mixed with Resene Colorwood Enhance to add additional colour to timber. |
Resene Qristal ClearFloor 2K Resene Qristal ClearFloor 2K is a two component waterborne urethane durable flooring finish designed to protect your wooden flooring and keep it looking its best for longer. Typical uses: Timber or timber composite flooring. Do not mix with Resene Colorwood Enhance. |
Resene Woodsman Greywash Resene Woodsman Greywash is an exciting way of achieving a greywash effect on new or weathered exterior timber. It’s based on Resene Woodsman Whitewash but with extra black tint, that scandi whitewash look becomes a softer greywashed look. It's available in two standard finishes or you can create your own greywash intensity by applying tinted Resene wood stain first, then overcoating with Resene Woodsman Greywash. Resene Woodsman is also available in a range of other colours from traditional timber colours to brights. You can also get it tinted to many Resene Colorwood colours for a consistent colour palette inside and outside your project. For a greywashed finish inside use Resene Colorwood Greywash. Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. |
Resene Woodsman Whitewash Resene Woodsman Whitewash is an exciting way of achieving a whitewash effect on new or weathered exterior timber. Resene Woodsman is also available in a range of other colours from traditional timber colours to brights. You can also get it tinted to many Resene Colorwood colours for a consistent colour palette inside and outside your project. For a whitewashed finish inside use Resene Colorwood Whitewash. Typical uses: Beams, fences, plywood and profiled sheets, timber - dressed and rough sawn, weatherboards. |