Build this mini mug shelf in a few hours and use two Resene paint stirrers to form a handy hanging device.
Weekend DIY with Mark Rayner - Project 10
Difficulty level: Moderate
You will need: 20mm plywood or MDFcut to the following dimensions: 70mm x 350mm (x3) 70mm x 300mm (x2), 25mm nails, 40mm panel pins, Hammer, Paintbrush, Panel pins, PVA glue, Pencil, Resene Enamacryl tinted to Resene Daredevil, Resene paint stirrers (x2), Resene Quick Dry, Saw, Sandpaper, Screwdriver, Screws, Set square, Tape measure
Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories
Can't find what you're looking for? Ask us!
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.