Feedback
Resene Paints - home page

deck rescue


From Habitat magazine - issue 16

Give a tired deck a new look. Brought to you by the experts at Hirepool.

Decking stains
Supplies

You will need:

How to stain a deck:

Step 1Step 1:  Clear the decks, literally. Remove all furniture and pots. Large filled pots are very heavy so remove with a trolley to save your back.
Step 2Step 2:  Sweep the deck with a stiff broom, and pick dirt and debris from corners and cracks with a putty knife.
Step 3Step 2b:  Sweep the deck with a stiff broom, and pick dirt and debris from corners and cracks with a putty knife.
Step 4
Step 3:  Scrub any mouldy areas with Resene Moss & Mould Killer, and then wash with Resene Timber and Deck Wash. Rinse off with a garden hose or low-pressure water blaster. DO NOT use a highpressure water blaster as this will fur up the timber grain. Sand the deck if needed to smooth rough spots or remove old stain. Use a belt sander for spot sanding or a floor sander for an entire deck. Begin sanding across the wood's grain, then diagonally, and finish by going with the grain. Before you sand, make sure all the nail heads are below the surface or the sandpaper will catch and tear.
Step 5
Step 4:  Apply the finish of your choice, either Resene Decking and Furniture Oil or a stain from the Resene Woodsman Decking Stain range (we used Resene Woodsman Decking Stain Sheer Black). Dark stains are good for disguising discoloured areas common in aged, weathered timber, particularly cedar. If you are using a dark colour, consider choosing a Resene CoolColourâ„¢ formulated with special pigment technology to reflect more heat than a standard stain colour.

Splits and rot

If your deck has areas of rot, splintering, long cracks, cupping and twisting, you will need to replace any unsightly or unsafe boards. Use a jigsaw or keyhole saw to cut through the decking directly next to the two joists on either end of the bad section.

Cut a 50mm x 100mm cleat to fit in the space next to the joist. Start one or two galvanised nails into the cleat before putting it in place, and then attach it flush to the top of the joist.

Cut a length of decking to fill the space. Attach it to the cleats with galvanised nails or decking screws. For nails, use a nail punch to put their heads below the surface.

Remove any damaged boards by prying up slowly from the end with a pry bar. Replace.

Brought to you by the experts at Hirepool.

equipment and expertise: by Hirepool


Search habitat magazine stories

Want to get your own free copy of future issues of habitat magazine?

If you have an idea, project or story that you think would suit habitat, we’d love to hear from you. Please drop us an email with your details and include photos if submitting a project.

Return to Habitat 16

 

Get inspired!  Sign up for our e-newsletter  |  Get saving!  Save with a Resene DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints Ltd   – www.resene.com

View Videos

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.