Over 90% of eye injuries are due to four general causes:
Being struck in the eye by flying particles and objects.
Striking the eye against moving or stationary objects.
Exposure to welding flash, hot substances, laser beams, infrared radiation, laser reflection.
Lay patient on floor and pour copious amounts of water gently into the eyes while holding the eyelids open.
Continue for 15 minutes. Get professional medical attention.
If the patient is wearing contact lenses, don't attempt to remove them before or during the 15 minute irrigation. Usually the lenses will be washed out of the eyes. If this doesn't occur, the lenses will slide off the pupil and migrate to the back of the eyes. They may be safely left there until medical attention is available.
|Thrown particles||Face shield, goggles, glasses with side-shields.||Select according to factors: hot or cold particles, high speed or low, hard or soft. See AS/NZS 1337:1992 Eye protectors for industrial applications.|
|Thrown objects||High-impact face shields, goggles.||Select according to factors: hot or cold particles, high speed or low, hard or soft. See AS/NZS 1337:1992 Eye protectors for industrial applications.|
|Splashes||Molten metals, hot or very cold liquids, corrosive liquids, chemicals, detergents.||Goggles and masks.||Ensure the goggle or mask ventilation system is splash-proof and the mask fits the face contours. See Standard above.|
|Dusts||Work with powdered materials, abrasives, dry organic material, chemicals, some corrosives.||Light goggles.||Close fit is important. Ensure any ventilation system is dust-proof. See Standard above.|
|Fumes||May be corrosive or irritant. Can be produced by hot materials, chemical agents, smog (e.g. automobile exhaust fumes, mainly hydrocarbons).||Goggles and masks.||Lens type governed by other hazard factors. See Standard above.|
Contact lenses may be safely worn with all types of eye protection, including welding goggles and visors. Contact lenses do not provide protection against eye hazards and must not be considered as a substitute for the appropriate type of personal protective equipment.
Resene Paint and Decorating Problems Solver
Learn more about typical painting problems and situations you may find when decorating. Also, understanding paint hazards and essential precautions - putting your safety first!
Can't find what you're looking for? Ask us!
We would love to hear from you if you wish to use Resene's images, information and ideas for social medial, blogs, newsletters and other media use. Please email email@example.com and let us know what you need, what it is for and how Resene will be acknowledged as the source of the content. We are happy to assist with most requests.
Our vision is to be respected as a trusted, ethical and sustainable company and acknowledged as the leading provider of innovative paint and colour technology. View Resene’s profile, Quality Policy, Environmental Policy and Health & Safety Policy.
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.