Add 10.5% to the initial surface area calculation. For example, a corrugated iron structure 200m2 will actually have a surface area of 200m2 x 1.105 = 221m2.
A two metre high solid fence has an extra 45% surface area on the post and batten side. For example, if the front face of the fence is 2 metres high by 10 metres long then the surface area is 2 x 10 = 20m2. The post and batten side would therefore have a surface area of 20 x 1.45 = 29m2.
For older buildings and houses, take the floor area and add 40% – allows for soffits, roof pitch, corrugations and overhangs. For newer homes with small soffits allow floor area plus 25%.
For the given surface area, allow up to twice the amount of paint or stain for the first coat.
Based on a model of 1cm high pyramids with a 1cm base (coarse texture), the surface area is two times greater than the base area. If the height of the pyramids is 0.5cm (representing a medium texture) the increase in surface area is about 40%.
Add 50% to the flat surface area.
Unprimed weatherboards require priming back and front. Stained weatherboards require the first coat also to go all around. The total area of a (rusticated) weatherboard is 21/2 times the area that is shown when it is fixed.
Can't find what you're looking for? Ask us!
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.