Mark Rayner comes up with a quick and easy frame for climbing plants.
You will need: Seven 19mm x 19mm x 1.8m garden stakes, tape measure, pencil, set square, saw, drill with 2mm drill bit, exterior PVA glue, 30mm x 2.5mm galvanised clouts and a paintbrush. Resene Quick Dry waterborne primer undercoat and Resene Lumbersider tinted to Resene Bright Red.Top tip: If you plan to grow a rose on your climber support, make the horizontal bars 50% longer so you can spread the ‘fan’ wider or add additional sections on the outside of your ‘fan’. This will help increase the number of blooms your rose produces.
Step 2
Measure across the top and bottom of the fan shape and measure and mark crosspieces to fit (ours measured about 700mm and 120mm).
Order online now:
Testpots |
Paints |
Primers and Sealers |
Stains |
Clears |
Accessories
Get inspired ! Subscribe Get saving ! Apply for a DIY card
Can't find what you're looking for? Ask us!
Company profile | Terms | Privacy policy | Quality and environmental policy | Health and safety policy
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.
What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧