Resene Paints Engineered Coating Systems

Resene Engineered Coating Systems
Resene offer a range of protective, industrial and marine coatings, capable of dealing with on and offshore corrosion and protecting many substrates in aggressive environments.

	Resene Alumastic high build epoxy Resene Alumastic is formulated with a unique blend of low-molecular weight resins, penetrants and surface active agents. This allows excellent wetting and penetration of rusted steel surfaces. Reaction occurs on the surface, setting the components into a high molecular weight, tough durable polymer. Self-priming maintenance coat over steel, rusted steel and galvanised steel. See Data Sheet RA402 for technical information. View Safety Data Sheet - base or hardener.

	Resene Aquapoxy waterborne epoxy - interior Resene Aquapoxy is a two pack waterborne epoxy polyamino-amide. The cured film is glossy and non-yellowing with high surface hardness and excellent flexibility. It exhibits excellent adhesion and water resistance, and is tolerant of application over damp surfaces. Its excellent solvent resistance makes it very resistant to graffiti. The chemical resistance is similar to conventional solventborne epoxies. See Data Sheet RA42 for technical information. View Safety Data Sheet - base or hardener.

	Resene Aquapoxy for Flooring waterborne epoxy - interior Resene Aquapoxy is a two pack waterborne epoxy polyamino-amide floor coating. The cured film is glossy and non-yellowing with high surface hardness. It has excellent adhesion and water resistance, and is tolerant of application over damp surfaces. The chemical resistance is similar to conventional solventborne epoxies. Resene Aquapoxy is available modified with Resene SRG Grit to provide a non-skid surface. This is achieved with some sacrifice to cleanability. An excellent compromise consists of one coat of Resene SRG Grit modified Resene Aquapoxy followed by one coat of unmodified Resene Aquapoxy. See Data Sheet RA43 for technical information. View Safety Data Sheet - base or hardener.

	Resene ArmourBond epoxy sealer Resene ArmourBond is a low viscosity, penetrative epoxy sealer and porosity equaliser for porous substrates. Reinforces rusted steel surfaces to give a sound base for application of protective coating systems. See Data Sheet RA408 for technical information. View Safety Data Sheet - base or hardener.

	Resene ArmourCat 800 clear sealer - interior Resene ArmourCat 800 is a two pack, acid-catalysed clear sealer for priming composite boards and timber prior to application of Resene ArmourCat clear finishes. See Data Sheet RA83 for technical information. View ArmourCat A4 brochure. View Safety Data Sheet - base or hardener.

	Resene ArmourCat 805 pigmented sealer/undercoat - interior Resene ArmourCat 805 is a two pack, tintable acid-catalysed sealer/undercoat for priming composite boards and timbers prior to application of Resene ArmourCat metallic and solid colours. Exhibits quick drying; excellent filling and sanding characteristics. See Data Sheet RA84 for technical information. View ArmourCat A4 brochure. View ArmourCat A4 brochure. View Safety Data Sheet - base or hardener.

	Resene ArmourCat 810 metallic effects - interior Resene ArmourCat 810 is a two pack, acid-catalysed finish formulated to produce metallic and special effects. May be overcoated with either Resene ArmourCat or Duragloss clear finishes for enhanced wear and appearance. See Data Sheet RA85 for technical information. View ArmourCat A4 brochure. View Safety Data Sheet - base or hardener.

	Resene ArmourCat 822 satin solid colour - interior Resene ArmourCat 822 is a two pack, acid-catalysed pigmented satin finish for composite boards and timber. See Data Sheet RA87 for technical information. View ArmourCat A4 brochure. View ArmourCat A4 brochure. View Safety Data Sheet - base or hardener.

	Resene ArmourCat 823 gloss solid colour - interior Resene ArmourCat 823 is a two pack, acid-catalysed pigmented gloss finish for composite boards and timber. See Data Sheet RA88 for technical information. View ArmourCat A4 brochure. View ArmourCat A4 brochure. View Safety Data Sheet - base or hardener.

	Resene ArmourCat 842 satin clear - interior Resene ArmourCat 842 is a two pack, acid-catalysed satin clear finish for composite boards and timber. Suitable for use as a clear over Resene ArmourCat 810 Metallic Effects for improved durability and cleaning. See Data Sheet RA89 for technical information. View ArmourCat A4 brochure. View ArmourCat A4 brochure. View Safety Data Sheet - base or hardener.

	Resene ArmourCat 843 gloss clear - interior Resene ArmourCat 843 is a two pack, acid-catalysed gloss clear finish for composite boards and timber. Suitable for use as a clear over Resene ArmourCat 810 Metallic Effects for improved durability and cleaning. See Data Sheet RA90 for technical information. View ArmourCat A4 brochure. View ArmourCat A4 brochure. View Safety Data Sheet - base or hardener.

	Resene Armourchlor HB-F chlorinated rubber high build finish - exterior/interior Resene Armourchlor HB-F is a single pack high build chlorinated rubber finish coat providing outstanding resistance to corrosion in severe atmospheres, where it may be difficult or uneconomic to employ a two pack coating. These characteristics ensure maintenance free performance during many years' exposure in highly corrosive environments. See Data Sheet RA61 for technical information. View ArmourCat A4 brochure. View Safety Data Sheet.

	Resene Armourchlor HB-P chlorinated rubber high build primer - exterior/interior Resene Armourchlor HB-P is a tough durable corrosion inhibiting primer based on zinc phosphate and chlorinated rubber. The coating has a very high degree of impermeability and although blast cleaning must always remain the preferred method of surface preparation it will give superior performance over power or hand cleaned steel. See Data Sheet RA60 for technical information. View Safety Data Sheet.

	Resene Armourchlor AM-ZP chlorinated rubber primer/finish Coat - interior Resene Armourchlor AM-ZP is a tough, self-priming corrosion inhibiting finish coat based on zinc phosphates and chlorinated rubber for use on suitably prepared interior metal surfaces. See Data Sheet RA62 for technical information. View Safety Data Sheet.

	Resene Armourcote 210 modified alkyd high build primer Resene Armourcote 210 is a single-pack, high-build inhibitive primer for general industrial and non-immersion marine use. Suitable for overcoating with a wide range of protective and decorative topcoat systems. See Data Sheet RA35 for technical information. View Safety Data Sheet.

	Resene Armourcote 220 epoxy primer Resene Armourcote 220 is a polyamide cured inhibitive epoxy primer for general industrial and marine use. May be recoated with a wide range of topcoats to give durable paint systems for immersion and non-immersion services. Excellent aged recoatability with epoxies. See Data Sheet RA34 for technical information. View Safety Data Sheet - base or hardener. View Safety Data Sheet - base or hardener.

	Resene Armourcote 221 brushing epoxy primer Resene Armourcote 221 combines the performance properties of a quality inhibitive epoxy primer with the convenience of brush or roller application. Suitable for priming both ferrous and non-ferrous metals that are to be finished with brushing two component polyurethanes, such as Resene Uracryl 400 Series topcoats. primer for new or maintenance work. See Data Sheet RA36 for technical information. View Safety Data Sheet - base or hardener.

	Resene Armourcote 510 high solids epoxy Resene Armourcote 510 is a high performance, self-priming epoxy mastic combining superb adhesion with true barrier properties. Will tolerate compromised surfaces such as handcleaned steel. See Data Sheet RA40 for technical information. View Safety Data Sheet - base or hardener.

	Resene Armourcote 512 epoxy enamel Resene Armourcote 512 is a high build, gloss epoxy finish that protects concrete and metals against corrosion and chemical degradation. Fully cured film is hard and abrasion resistant. See Data Sheet RA407 for technical information. View Safety Data Sheet - base or hardener.

	Resene Armourcote 515 HS fast dry epoxy Resene Armourcote 515 HS is a high performance epoxy intermediate/base coat which forms an excellent corrosion barrier. Fast dry characteristics are especially beneficial where early handling of coated items or same day application of multi-coat systems is required. Excellent low temperature cure properties allow use of the product over winter when application of conventional epoxy cure based systems is not possible. Suitable for use in most industrial and marine environments. Formulated for spray application. See Data Sheet RA404A for technical information. View Safety Data Sheet - base or hardener.

	Resene Armourcote 608 fast dry spraying enamel - exterior/interior Resene Armourcote 608 is a high gloss, fast dry spraying enamel based on a modified polyester resin. Durability, colour and gloss retention is typical of high quality gloss enamels. See Data Sheet RA72 for technical information. View Safety Data Sheet.

	Resene Armourzinc 110 zinc rich primer single pack Resene Armourzinc 110 is a high zinc content primer exhibiting the excellent corrosion resistance of zinc rich primers. Prevents underfilm corrosion at areas of damage. See Data Sheet RA23 for technical information. View Safety Data Sheet.

	Resene Armourzinc 120 zinc epoxy primer Resene Armourzinc 120 is a tough, abrasion resistant film that bonds strongly to steel, inorganic zinc and existing epoxy surfaces. zinc content of the coating gives steel cathodic protection if the film is damaged. Rapid drying permits early handling of steel when Resene Armourcote 220 is used as a shop primer for new construction projects. See Data Sheet RA22 for technical information. View Safety Data Sheet - base or hardener.

	Resene Armourzinc 125 inorganic hybrid primer Resene Armourzinc 125 is a two-pack, inorganic hybrid, zinc rich primer. Base primer for high performance protective coating systems for steel structures in demanding environments. Fast dry-to-recoat increases through-put of multi-coat systems. Unique rheology allows defect-free films to be readily produced. Cures to a dense film with minimal pinholing when overcoated. See Data Sheet RA24 for technical information. View Safety Data Sheet - base or hardener.

	Resene Graffiti Cleaner exterior/interior Resene Graffiti Cleaner is formulated for effective and easy removal of graffiti from Resene Engineered Coating Systems anti-graffiti coatings. Very effective against common materials used for graffiti, such as spray paint, permanent markers, inks, crayons and lipsticks. See Data Sheet RA101 for technical information. View Safety Data Sheet.

	Resene Imperite 413 polyester-urethane gloss - exterior/interior Resene Imperite 413 is a highly decorative and durable two pack gloss urethane topcoat for the decoration and protection of interior and exterior surfaces. Ideal for use where bright colours and outstanding colour and gloss retention are to be an architectural feature. Excellent resistance to a wide range of chemicals, solvents and salt solutions. Extremely durable topcoat, resists marring and scuffing. See Data Sheet RA57 for technical information. View Safety Data Sheet - base or hardener.

	Resene Imperite I.F. 502 acrylic-epoxy semi-gloss clear - exterior/interior Resene Imperite I.F. 502 improves the cleanability, abrasion resistance and colour retention of Resene Imperite I.F. 503 Metallic Effects finishes (hyperlink to info). See Data Sheet RA82 for technical information. View Safety Data Sheet.

	Resene Imperite I.F. 503 acrylic-epoxy gloss - exterior/interior Resene Imperite I.F. 503 is a high performance finish for use when an isocyanate-free topcoat is required. Two-component finish for a wide variety of suitably prepared substrates in all but the most demanding environments. Quick dry properties allow early handling of coated items. Available in solid and metallic pigmented colours. See Data Sheet RA81 for technical information. View Safety Data Sheet - base or hardener.

	Resene Mica Bond micaceous pigmented alkyd finish - exterior/interior Resene Mica Bond is an oleoresinous based micaceous iron oxide pigmented coating modified with aluminium to provide lighter colours. Resene Mica Bond is highly resistant to weathering, and mildly corrosive conditions. Its pigmentation confers a very high degree of moisture vapour resistance due to its laminar type structure. See Data Sheet RA71 for technical information. View Safety Data Sheet.

	Resene Polymeric AV-8 high build vinyl - exterior/interior Resene Polymeric AV-8 is a single pack high-build vinyl topcoat providing outstanding resistance to corrosion in severe atmospheres. Contains an acrylic reinforcement to provide superior gloss and colour retention. These characteristics ensure maintenance-free performance over many years exposure in highly corrosive environments. See Data Sheet RA63 for technical information. View Safety Data Sheet.

	Resene Rust-Arrest alkyd anti-corrosive primer Resene Rust-Arrest is a lead and chromate free primer developed for use on steel where optimum surface preparation is not practical. Resene Rust-Arrest has good surface wetting properties and protects via passivating pigments. See Data Sheet RA30A for technical information. View Safety Data Sheet.

	Resene Squash Court Coating interior Resene Squash Court Coating is a two pack waterborne epoxy especially developed for coating squash court walls. See Data Sheet RA406 for technical information. View Safety Data Sheet - base or hardener.

	Resene Steel Fab chromate free fast dry shop primer Resene Steel Fab primer is a fast drying, general purpose anti-corrosive primer for use on structural steel. See Data Sheet RA32 for technical information. View Safety Data Sheet.

	Resene Uracryl 401 urethane-acrylic undercoat/buildcoat - exterior/interior Resene Uracryl 401 is a unique high performance two component urethane undercoat for use as an undercoat/buildcoat on a wide variety of suitably prepared and primed substrates to be finished with pigmented Resene Uracryl 400 Series topcoats See Data Sheet RA54 for technical information. View Safety Data Sheet - base or hardener.

	Resene Uracryl 402 urethane-acrylic semi-gloss finish - exterior/interior Resene Uracryl 402 is a unique high performance two component finish coat with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oil. The most unusual feature of Resene Uracryl 402 is that, unlike most other classes of high performance coatings, it looks as good as it protects. The sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins gives a system unsurpassed for durability and colour retention. See Data Sheet RA55 for technical information. View Safety Data Sheet - base or hardener.

	Resene Uracryl 403 urethane-acrylic gloss finish - exterior/interior Resene Uracryl 403 is a unique high performance two component finish coat with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oils, alkalis and acids. The most unusual feature of Resene Uracryl 403 is that, unlike most other classes of high performance coatings, it looks as good as it protects. The sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins gives a system unsurpassed for gloss and colour retention. See Data Sheet RA56 for technical information. View Safety Data Sheet - base or hardener.

	Resene Uracryl 404 urethane-acrylic low sheen finish - exterior/interior Resene Uracryl 404 is a unique high performance two component finish coat with excellent resistance to abrasion, moisture, petroleum solvents and mineral and vegetable oil. The most unusual feature of Resene Uracryl 404 is that, unlike most other classes of high performance coatings, it looks as good as it protects. The sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins gives a system unsurpassed for durability and colour retention. See Data Sheet RA59 for technical information. View Safety Data Sheet - base or hardener.

	Resene Vinyl Etch adhesion primer Resene Vinyl Etch primer combines all the versatility of the normal two pack product with the convenience of a stable single pack. The fast drying time, adhesion, abrasion resistance, and overcoatability features have all been maintained in this highly effective chromate free primer/ pretreatment. See Data Sheet RA31 for technical information. View Safety Data Sheet for Vinyl Etch (black, white, grey). View Safety Data Sheet for Vinyl Etch (red oxide).

	Resene Zincilate 10 inorganic zinc silicate two pack Resene zincilate 10 is a sacrificial two pack priming system for steel, having outstanding anti-corrosive properties. May be applied in conditions up to 95% relative humidity. Eliminates rust undercutting. Excellent resistance to abrasion and impact damage. See Data Sheet RA20 for technical information. View Safety Data Sheet - powder or liquid.

	Resene Zincilate 10F inorganic zinc silicate two pack Resene zincilate 10F is a sacrificial priming system for steel components protected with a variety of high performance coating systems in a range of aggressive environments. Protects steel galvanically and minimises underfilm corrosion in the event of coating damage. Solvent balance of product reduces number of passes required to achieve recommended film thickness during application, at the cost of increased film porosity. See Data Sheet RA20 for technical information. View Safety Data Sheet.

	Resene Zincilate 11 inorganic zinc silicate single pack Resene zincilate 11 is a sacrificial priming system for steel with superb anti-corrosive properties. May be applied in conditions up to 95% humidity. Eliminates rust undercutting. Excellent resistance to abrasion and impact damage. The performance is equivalent to the more common two pack systems with the following significant benefits: Eliminates mixing procedures on-site and the errors this can cause; Eliminates waste as unused material can be stored for subsequent use; A mechanically agitated pot is no longer necessary; A bottom outlet pot becomes optional. See Data Sheet RA21 for technical information. View Safety Data Sheet.

	Environmentally responsible packaging Resene metal packaging includes recycled material and is printed using UV inks and varnishes ensuring energy savings and no emissions. Resene paper labels are printed on environmentally responsible paper, which complies with the requirements of environmental management systems EMAS and ISO14001, using vegetable inks.

	Return to product range index