Close Give Feedback
Resene Paints - home page
Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube

Resene FX Write-on Wall Paint application and use instructions


Please read before applying or using Resene FX Write-on Wall Paint.

 

Write on your walls with whiteboard markers without damaging the surface with Resene FX Write-on Wall Paint. Resene FX Write-on Wall Paint is a two component waterborne clear coating designed to produce a whiteboard effect over previously painted or sealed substrates. Use only with high quality whiteboard markers using a whiteboard eraser or soft cloth to clean. Or over a darker paint finish use high quality liquid chalk.

Preparations

Existing surfaces

New surfaces

Application

Use

Quick Check

Use on: Interior smooth wallboards and panels where a hardwearing whiteboard style finish is required.

Finish: Gloss

Typical coverage: 12–14 square metres per litre.

Pot life: Up to 3 hours at 18°C. Pot life will be reduced at higher temperatures. Keep mixed product in a cool place in-between coats. Product will not noticeably thicken at the end of useable pot-life. Do not use beyond 3 hours after mixing at 18°C.

Dry time (minimum): 30 min touch dry at 18°C, tack free 3-6 hours.

Recoat time (minimum): 2 hours at 18°C.

Usual number of coats: Two.

Application method: Roller – Resene No.4 roller sleeve.

Thinning and clean up: Thinning should not be necessary but up to 5% water may be added. Do not thin with glycol containing thinners including Resene Hot Weather Additive. Clean up with water immediately after finishing. Application equipment will be irreversibly damaged if uncured product is not thoroughly removed.

Colour range: Milky when wet, clear and colourless when dry and cured.

Before use: Stir well with a wide flat stirrer and also stir during application. Improper mixing can lead to ghosting.

CAUTION
Do not tightly re seal left over quantities of mixed product; the mixed product generates carbon dioxide gas, which can cause the lid of a tightly sealed can to pop with force. The volume of gas produced is directly related to the volume of left over paint. Leave the mixed material uncovered in a safe place for at least 48 hours for out gassing to be completed. After this the cans can be sealed up and disposed of through a Resene PaintWise location or an approved hazard waste site.

Always read label before use.
Keep out of reach of children.

 

Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories

Get inspired Get inspired ! Subscribe      Get saving Get saving ! Apply for a DIY card

Resene Paints Ltd

Can't find what you're looking for? Ask us!

Resene Paints Ltd   – www.resene.com

Follow us on Facebook Follow us on Pinterest Follow us on Instagram Follow us on YouTube
Videos on how to paint and stain your house
 

Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online.   See measurements/conversions for more details on how electronic colour values are achieved.

What's new | Specifiers | Painters | DIYers | Artists | Kids | Sitemap | Home | TOP ⇧