Paint systems for earthquake affected building — select the surface you will be painting from the list below to view how to prepare and finish the surface.
Walls – preparation:
Walls – finishing (by room/s):
Other areas – preparation and finishing
Note: For a visual of the steps below outlining how to repaint roofs, please reference the PDF flowchart.
Note: For more information on products, view the Product Data Sheet referred to in ( ) after the product name.
Existing roofs in good condition simply need thorough washing with Resene Roof Wash and Paint Cleaner to remove chalking, dirt and salt deposits, followed by a good rinse with clean water. Remember to disconnect spoutings if rainwater is collected.
Consider using a Resene CoolColour to minimise heat retention if selecting a dark colour.
Resene Moss & Mould Killer will be needed if there is any moss and mould present, often where trees overhang roofs. Lichens will need to be scraped off.
Order online now:
Testpots | Paints | Primers and Sealers | Stains | Clears | Accessories
Can't find what you're looking for? Ask us!
Colours shown on this website are a representation only. Please refer to the actual paint or product sample. Resene colour charts, testpots and samples are available for ordering online. See measurements/conversions for more details on how electronic colour values are achieved.