b'boxing cleverReseneThis cool multi-purpose trunk is finished inSkywaterResene Half timber stains for a slightly weathered effect.Spanish WhiteYou will need:Two 65mm x 18mm battens at 530mm long for the underside of Note that the timber cutting list and the final size of the trunk will varythe lidaccording to the plank sizes available at your timber merchant. Two 45mm x 45mm battens at 530mm long for the feet 140mm x 18mm planks (we used dressed timber but you can also Resene Waterborne Woodsman timber stain in colours of youruse rough-sawn) cut into the following lengths for a trunk thatchoice. We used two testpots of Resene Woody Bay (dark); two measures 1200mm long x 540mm deep x 623mm high:testpotsofReseneSkywater(mid-tone)and1litreofResene Weathered Grey (light).8 planks at 1200mm long for the front and back8 planks at 504mm long for the endsWood screws, galvanised or stainless steel (25mm, 40mm and4 planks at 1220mm long for the lid 65mm) Either use four more planks at 1164mm long for the base or useElectric drill a piece of chipboard or plywood measuring 1164mm x 504mm. SquareWe used 10mm thick plywood.Sanding block and sheets of 120-grit sandpaper 25mm x 25mm battens for the inside corners: 4 at 520mm long50mm paint brush 25mmx25mmbattensforframingtheplywoodbase,two Card or thin plastic to use as spacers and to mask 1164mm long and two 454mm longTwo galvanised strap hinges and two galvanised trunk handles60'