Dinosaur garden

Step one
Ask an adult to help you apply one coat of Resene Aquapel & Terracotta Sealer to the inside and outside of the terracotta pot and allow the sealer to dry.

Step two
Paint the outside of the pot and the top rim using a testpot of Resene Dizzy Lizzy. Also paint a band about 5cm or so deep on the inside of the pot below the rim (as shown in the photo). Allow the paint to dry.

Step three
Apply a second coat of Resene Dizzy Lizzy to the pot and allow the paint to dry.

Step four
Using a small trowel, carefully put some potting mix into the pot to about 5cm below the rim – you might need an adult to help you with this step.

Step five
Carefully plant your small succulent plants into the potting mix – again, you might want an adult to help you here.

Step six
Carefully put a 2cm layer of gravel on top of the potting mix (as shown in the photo), taking care not to disturb the plants.

Step seven
Position your dinosaurs on top of the gravel to create your own Jurassic Park.

Finished project