Resene surface preparation products

Resene surface preparation products - click to print this section

	Resene Broadwall 3 in 1 surfacer, sealer, finish coat - interior - waterborne Environmental Choice approved Resene Broadwall 3 in 1 is designed for use over stopped and jointed wall systems in place of traditional surfacers and sealers. It equalises surface porosities; smoothes minor surface irregularities; minimises textural differences; VOC free and provides a perfect base for subsequent Resene finishes. A key element to achieving a Level 5 finish on paperfaced plasterboard. Suitable for use as a surfacer, sealer and finish coat on ceilings in dry areas. See product flyer. See Data Sheet D810 for technical information. View Safety Data Sheet.

	Resene Broadwall Surface Prep & Seal interior - waterborne Environmental Choice approved - Good Environmental Choice Australia approved Resene Broadwall Surface Prep & Seal is designed for use over stopped and jointed wall systems. It equalises surface porosities; smoothes minor surface irregularities; minimises textural differences; VOC free and provides a perfect base for subsequent Resene finishes. Key element to achieving a level 5 finish on paperfaced plasterboard. See Data Sheet D807 for technical information. View Safety Data Sheet.

	Resene Brushable Crack Filler acrylic sealant Environmental Choice approved Resene Brushable Crack Filler is a convenient way to deal with small cracks in concrete buildings, which may still be cyclically moving up to 25%. It is designed to handle cracks up to a maximum of 2mm wide. See Data Sheet D811 for technical information. View Safety Data Sheet.

	Resene Deep Clean liquid concentrate - exterior Resene Deep Clean is a simple, safe method of keeping all your outdoor areas free from moss, mould, algae and lichen. Simply spray or brush on and leave Resene Deep Clean and nature to do the work. Slow acting Resene Deep Clean gets right down to the roots of the problem, destroying the growth and combining with U.V light and rain to weather off the remains to leave a Resene Deep Clean surface. Ideal for use on paths, patios, decks and other exterior cementitious, timber and painted surfaces. Find out more about caring for your paint finish. View Safety Data Sheet.

	Resene Emulsifiable Solvent Cleaner oil and grease remover - exterior/interior Resene Emulsifiable Solvent Cleaner is a blend of solvents specifically designed to dissolve oil and greasy residues on surfaces prior to painting. May be rinsed with clean water to produce a totally grease-free surface. Used prior to steam cleaning it is the best pre-treatment of smoke damaged surfaces. See Data Sheet D804 for technical information. View Safety Data Sheet.

	Resene Epox-O-Bond epoxy filler - exterior/interior Resene Epox-O-Bond is a two component epoxy filler or surfacing compound with excellent non-sag and gap-filling qualities. Adheres to a wide range of materials but is not designed for flexible materials and certain plastics. See Data Sheet D808 for technical information. View Safety Data Sheet.

	Resene Interior Paintwork Cleaner Resene Interior Paintwork Cleaner is a labour saving non-dulling neutral cleaner designed for use on all interior painted surfaces. Quick and easy to use, it dries film-free eliminating the need for rinsing. Available in concentrate or ready to use variants. Find out more about caring for your paint finish. View Safety Data Sheet.

	Resene Limelock cure and seal - exterior - waterborne Environmental Choice approved Resene Limelock is a new preparatory coating used for the curing and sealing of cementitious substrates. It promotes cure by producing a water barrier, which unlike traditional curing membranes, may be overcoated with waterborne finishes at any stage. Its ability to cure and seal the substrate eliminates the need to leave the plaster to cure for seven days before painting. When dark, heat absorbing topcoats are planned, it is still prudent to wait seven days before painting. Resene Limelock traps free lime in the cementitious substrate protecting the paint finish against the appearance of unsightly lime staining, and providing a perfect base for subsequent Resene finishes. See Data Sheet D809 for technical information. View Safety Data Sheet. View Resene Limelock flyer.

	Resene Moss & Mould Killer liquid concentrate - exterior/interior Resene Moss & Mould Killer is a hypochlorite based wash with extreme efficiency of killing and bleaching most common moulds and fungi. Should be used prior to repainting of cementitious surfaces as mould growth is normally present. See Data Sheet D80 for technical information. See the online problem solver section for information on mould. Find out more about caring for your paint finish. View Safety Data Sheet.

	Resene Paint Prep and Housewash liquid concentrate - exterior/interior Resene Paint Prep and Housewash is a quick and easy way to clean surfaces ready for painting or use annually to give homes and buildings a fresh look by washing away dirt and contaminants that may be present. See Data Sheet D812 for technical information. Find out more about caring for your paint finish. View Safety Data Sheet.

	Resene Roof Wash and Paint Cleaner liquid concentrate - exterior Resene Roof Wash and Paint Cleaner is the ideal pre-treatment for painted and unpainted galvanised steel and for general cleaning of any previously painted surface. See Data Sheet D88 for technical information. Find out more about caring for your paint finish. View Safety Data Sheet.

	Resene Strip-Off paint stripper - exterior/interior Resene Strip-Off is an effective, easy-to-use paint stripper providing excellent penetration without the dangers associated with methylene chloride based paint strippers. See Data Sheet D81 for technical information. View Safety Data Sheet.

	Resene Timber and Deck Wash liquid concentrate - exterior Resene Timber and Deck Wash is a quick and easy way to clean surfaces, such as weatherboards and decks, prior to staining or painting. See Data Sheet D813 for technical information. Find out more about caring for your paint finish. View Safety Data Sheet.

	Resene Timber Surface Prep exterior/interior Environmental Choice approved Resene Timber Surface Prep is a low VOC pigmented high build waterborne surfacer for solid timber. Used to upgrade and fill surface defects in solid timber substrates prior to application of waterborne finishing systems. See Data Sheet D814 for technical information. View Safety Data Sheet.

	Resene TimberLock preserver/conditioner - exterior - solventborne Resene TimberLock is a multi-functional timber treatment designed to increase the water, fungal and U.V. resistance of the wood surface itself, improving the performance of subsequently applied finishes. A penetrating material, it also has the ability to regenerate wood fibres laid bare by U.V. and weather attack and re-build them into a wood-like material. See Data Sheet D48 for technical information. View Safety Data Sheet.

	We also stock the Sea to Sky paint stripper range (NZ only). See brochure.

	Some products or services may not be offered in your area or country. Please check with your local Resene ColorShop for availability. Most products can be ordered on request though lead times and minimum order quantities may apply.
	Environmentally responsible packaging Resene metal packaging includes recycled material and is printed using U.V. inks and varnishes ensuring energy savings and no emissions. Resene paper labels are printed on environmentally responsible paper, which complies with the requirements of environmental management systems EMAS and ISO14001, using vegetable inks.